PM7344 S/UNI-MPH
DATA SHEET
PMC-950449
ISSUE 6
MULTI-PHY USER NETWORK INTERFACE
When BEEE is set to logic 0, bit error events are disabled from generating an
interrupt.
SFEE:
The SFEE bit enables the generation of an interrupt when a severely errored
framing event has been detected. A severely errored framing event is defined
as 2 or more framing bit errors during the current superframe for SF and ESF
formatted data. When SFEE is set to logic 1, the detection of a severely
errored framing event is allowed to generate an interrupt. When SFEE is set
to logic 0, severely errored framing events are disabled from generating an
interrupt.
MFPE:
The MFPE bit enables the generation of an interrupt when the frame find
circuitry detects the presence of framing bit mimics. The occurrence of a
mimic is defined as more than one framing bit candidate following the frame
alignment pattern. When MFPE is set to logic 1, the assertion or deassertion
of the detection of a mimic is allowed to generate an interrupt. When MFPE is
set to logic 0, the detection of a mimic framing pattern is disabled from
generating an interrupt.
INFRE:
The INFRE bit enables the generation of an interrupt when the frame find
circuitry changes state. When INFRE is set to logic 1, the assertion or
deassertion of the "inframe" state is allowed to generate an interrupt. When
INFRE is set to logic 0, a change in the "inframe" state is disabled from
generating an interrupt.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
113