STANDARD PRODUCT
PM5365 TEMAP
DATASHEET
PMC-1991148
ISSUE 3
HIGH DENSITY VT/TU MAPPER
AND M13 MULTIPLEXER
RFPO/RMFPO, ROVRHD, TFPO/TMFPO/TGAPCLK, SBIACT, LAOE,
RECVCLK1, RECVCLK2, and INTB have 4 mA drive capability. The SBI
outputs and telecom bus outputs, SDDATA[7:0], SDDP, SDPL, SDV5,
SAJUST_REQ, LAC1J1V1, LADATA[7:0], LADP and LAPL, have 8mA drive
capability. The bidirectional SBI signal SC1FP has 8mA drive capability.
3. IOL = -2mA for others.
4. Inputs RSTB, ALE, TMS, TDI, TRSTB and CSB have internal pull-up
resistors.
5. Input A[13] has an internal pull-down resistor.
6. All unused inputs should be connected to GROUND.
7. All TEMAP outputs can be tristated under control of the IEEE P1149.1 test
access port, even those which do not tristate under normal operation. All
outputs and bi-directionals are 5 V tolerant when tristated.
8. Power to the VDD3.3 and VDDQ pins should be applied before power to the
VDD2.5 pins is applied. Similarly, power to the VDD2.5 pins should be
removed before power to the VDD3.3 and VDDQ pins are removed.
9. All TEMAP inputs are 5V tolerant.
Proprietary and Confidential to PMC-Sierra, Inc. and for its Customers’ Internal Use
56
PMC [ PMC-SIERRA, INC ]
