PMC-Sierra, Inc.
PM5356
S/UNI-622-MAX
DATASHEET
S/UNI-622-MAX
PMC-1980589
ISSUE 5
SATURN USER NETWORK INTERFACE (622-MAX)
Register 0x02: S/UNI-622-MAX Master Configuration #2
Bit
Bit 7
Type
Function
Default
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
SLLE
SDLE
0
0
0
0
1
1
1
1
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
LOOPT
DPLE
AUTOLRDI
AUTOPRDI
AUTOLFEBE
AUTOPFEBE
AUTOPFEBE
The AUTOPFEBE bit determines if the remote path block errors are sent upon detection of an
incoming path BIP error event. When AUTOPFEBE is set to logic one, one path FEBE is
inserted for each path BIP error event, respectively. When AUTOPFEBE is set to logic zero,
incoming path BIP error events do not generate FEBE events.
AUTOLFEBE
The AUTOLFEBE bit determines if remote line block errors are sent upon detection of an
incoming line BIP error event. When AUTOLFEBE is set to logic one, one line FEBE is
inserted for each line BIP error event, respectively. When AUTOLFEBE is set to logic zero,
incoming line BIP error events do not generate FEBE events.
AUTOPRDI
The AUTOPRDI bit determines whether STS path remote defect indication (RDI) is sent
immediately upon detection of an incoming alarm. When AUTOPRDI is set to logic one, STS
path RDI is inserted immediately upon declaration of several alarms. Each alarm can
individually be enabled and disabled using the S/UNI-622-MAX Path RDI Control Registers.
AUTOLRDI
The AUTOLRDI bit determines if line remote defect indication (RDI) is sent immediately upon
detection of an incoming alarm. When AUTOLRDI is set to logic one, line RDI is inserted
immediately upon declaration of several alarms. Each alarm can individually be enabled and
disabled using the S/UNI-622-MAX Line RDI Control Registers.
DPLE:
The Diagnostic Path Loopback, DPLE bit enables the S/UNI-622-MAX diagnostic loopback
where the S/UNI-622-MAX’s Transmit Path Overhead Processor (TPOP) is directly
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
70
PMC [ PMC-SIERRA, INC ]
