欢迎访问ic37.com |
会员登录 免费注册
发布采购

PM5356-BI 参数 Datasheet PDF下载

PM5356-BI图片预览
型号: PM5356-BI
PDF下载: 下载PDF文件 查看货源
内容描述: [ATM Network Interface, 1-Func, CMOS, PBGA304, SBGA-304]
分类和应用: ATM异步传输模式电信电信集成电路
文件页数/大小: 278 页 / 1562 K
品牌: PMC [ PMC-SIERRA, INC ]
 浏览型号PM5356-BI的Datasheet PDF文件第21页浏览型号PM5356-BI的Datasheet PDF文件第22页浏览型号PM5356-BI的Datasheet PDF文件第23页浏览型号PM5356-BI的Datasheet PDF文件第24页浏览型号PM5356-BI的Datasheet PDF文件第26页浏览型号PM5356-BI的Datasheet PDF文件第27页浏览型号PM5356-BI的Datasheet PDF文件第28页浏览型号PM5356-BI的Datasheet PDF文件第29页  
PMC-Sierra, Inc.  
PM5356  
S/UNI-622-MAX  
DATASHEET  
S/UNI-622-MAX  
PMC-1980589  
ISSUE 5  
SATURN USER NETWORK INTERFACE (622-MAX)  
9.3  
Clocks and Alarms Signals  
Pin Name  
Type  
Pin  
No.  
Function  
RCLK  
Output  
AC20  
The receive clock (RCLK) provides a timing reference for the  
S/UNI-622-MAX receive function outputs. RCLK is a 77.76  
MHz, 50% duty cycle clock.  
RFPO  
Output  
Output  
AB19  
The receive frame pulse output (RFPO), when the framing  
alignment has been found (the OOF register bit is low), is an 8  
kHz signal derived from the receive clock RCLK. RFPO pulses  
high for one RCLK cycle every 9720 RCLK cycles (STS-12c /  
STM-4-4c).  
RFPO is updated on the rising edge of RCLK.  
RALRM  
AA19  
The receive alarm (RALRM) output indicates the state of the  
receive framing. RALRM is low if no receive alarms are active.  
RALRM is optionally high if line AIS (LAIS), path AIS (PAIS), line  
RDI (LRDI), path RDI (PRDI), enhanced path RDI (PERDI), loss  
of signal (LOS), loss of frame (LOF), out of frame (OOF), loss of  
pointer (LOP), loss of pointer concatenation (LOPC/AISC), loss  
of cell delineation (LCD), signal fail BER (SFBER), signal  
degrade BER (SDBER), or path signal label mismatch (PSLM) is  
detected .  
RALRM is an asynchronous output with a minimum period of  
one RCLK clock.  
TCLK  
TFPO  
Output  
Output  
B19  
A20  
The transmit clock (TCLK) provides timing for the S/UNI-622-  
MAX transmit function operation. TCLK is a 77.76 MHz, 50%  
duty cycle clock.  
The active-high framing position output (TFPO) signal is an 8  
kHz signal derived from the transmit clock TCLK. TFPO pulses  
high for one TCLK cycle every 9720 RCLK cycles (STS-12c /  
STM-4-4c).  
TFPO is updated on the rising edge of TCLK.  
TFPI  
Input  
A21  
The active high framing position (TFPI) signal is an 8 kHz timing  
marker for the transmitter. TFPI is used to align the  
SONET/SDH transport frame generated by the S/UNI-622-MAX  
device to a system reference. TFPI should be brought high for a  
single TCLK period every 9720 TCLK cycles or a multiple  
thereof. TFPI must be tied low if such synchronization is not  
required.  
TFPI is sampled on the rising edge of TCLK.  
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA INC., AND FOR ITS CUSTOMERSINTERNAL USE  
21  
 复制成功!