STANDARD PRODUCT
PM4328 TECT3
DATASHEET
PMC-2011596
ISSUE 1
HIGH DENSITY T1/E1 FRAMER
AND M13 MULTIPLEXER
5
BLOCK DIAGRAM
5.1 Top Level Block Diagram
The diagram below shows the complete TECT3. T1 or E1 links can be
multiplexed into a DS3 (E1s following the ITU-T G.747 recommendation).
System side access to the T1s is available via the serial clock and data, H-MVIP
or SBI bus interfaces. System side access to the E1s is available via the serial
clock and data or H-MVIP interfaces. DS3 line side access is via the clock and
data interface for line interface units. Unchannelized DS3 system side access is
available through a serial clock and data interface or the SBI bus, both shown at
the top of the diagram.
PROPRIETARY AND CONFIDENTIAL
16
PMC [ PMC-SIERRA, INC ]
