PRELIMINARY
PM4318 OCTLIU
DATASHEET
PMC- 2001578
ISSUE 3
OCTAL E1/T1/J1 LINE INTERFACE DEVICE
Register 000H: Reset / Revision ID / Device ID
Bit
Type
Function
Default
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
R/W
R
RESET
TYPE[2]
TYPE[1]
TYPE[0]
ID[3]
0
1
0
0
0
0
0
0
R
R
R
R
ID[2]
R
ID[1]
R
ID[0]
RESET:
The RESET bit implements a software reset. If the RESET bit is a logic 1, the OCTLIU is
held in reset. This bit is not self-clearing; therefore, a logic 0 must be written to bring the
OCTLIU out of reset. Holding the OCTLIU in a reset state effectively puts it into a low-power,
stand-by mode. A hardware reset clears the RESET bit, thus deasserting the software reset.
TYPE:
The device identification bits, TYPE[2:0], are set to a fixed value of “100”
ID:
The version identification bits, ID[3:0], are set to a fixed value representing the version
number of the OCTLIU.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
58