PAW3602DH-NF
PAW3602DH-NF CMOS LASER MOUSE SENSOR
General Description
PAW3602DH-NF is a CMOS laser mouse sensor with DSP integration chip that serves as a non-mechanical
motion estimation engine for implementing a computer mouse.
Features
Single power supply
Precise laser motion estimation technology
Complete 2-D motion sensor
No mechanical parts
System Clock
27 MHz
28+ inches/sec
20g
800/1600cpi
6600 frames/sec
Power Supply
4.25V ~ 5.5V (VDD)
3.0V~3.6V (VDDD, VDDA)
Key Specification
Accurate motion estimation over most of
Speed
surfaces
High speed motion detection up to 28
Acceleration
inches/sec and acceleration can be up to 20g
High resolution up to 1600cpi
Power down pin and register setting for low
power dissipation
Resolution
Frame Rate
Power saving mode during times of no
movement
Operating
17 mA @Mouse moving (Normal)
Current
Serial Interface for programming and data
5 mA @Mouse not moving (Sleep)
(Sensor + LD) 200 uA @Shutdown mode
transfer
Low power for wireless application
Eye safety protection circuit
Package
Shrunk DIP20
Ordering Information
Order number
PAW3602DH-NF
I/O
CMOS output
Resolution
800/1600 cpi
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
1
PixArt Imaging Inc.
E-mail:
fae_service@pixart.com.tw
V1.0, Jun. 2007
PIXART [ PIXART IMAGING INC. ]
