PixArt Imaging Inc.
PAW3602DH-NF
0x06
Bit
Field
Usage
Notes
7
Reset
6
5
Reserved[3:2]
Configuration
4
3
PD
2
1
0
RES
Reserved[1:0]
CMOS Laser Mouse Sensor
The Configuration register allows the user to change the configuration of the sensor.
Shown below are the bits, their default values, and optional values.
Field Name
Reset
Reserved[3:2]
PD
Reserved[1:0]
Description
Reset full chip
0 = Normal operation (Default)
1 = Reset the fully chip
Reserved for future. Must be written to “00”
Power down mode
0 = Normal operation (Default)
1 = Power down mode
Reserved for future. Must be written to “00”
Output resolution setting. In the power-on initial state, the resolution is depend
on the CPI IO trap select pin. If MCU write the register, it is depend on the
register value.
0 = 1600
1 = 800
Image_Quality
7
6
5
4
3
Imgqa[7:0]
Image Quality is a quality level of the sensor in the current frame. Report range 0~255. The
minimum level for normally working is 45.
Field Name
Imgqa[7:0]
Description
Image quality report range: 0(worst) ~ 255(best).
2
1
0
RES
0x07
Bit
Field
Usage
Notes
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission
.
7
V1.0, Jun. 2007
PixArt Imaging Inc.
E-mail:
fae_service@pixart.com.tw