PixArt Imaging Inc.
ADNS-3090 High-Performance Optical Mouse Sensor
Pin #1
Features for
Illustration only
Product Number
Date Code
Lot Code
22.30
0.878
(6.43)
0.253
(4.86)
0.191
(1.21)
0.048
9.10
0.358
12.85
(At Shoulder)
0.506
7.05
3.18
0.99
0.278
0.125
0.039
2.25
±
0.03
0.089
±
0.001
90
±
3
Lead Offset 1.00
0.039
Lead Width
4.55
0.179
0.50
0.020
∅
5.60
±
0.03
2.00
Lead Pitch
0.079
Chamfer
0.3
0.012
Kapton Tape
0.25
0.010
12.85
±
0.74 (At Lead Tip)
0.506
±
0.029
1.82
±
0.03
0.071
±
0.001
6.025
0.237
0.220
±
0.001
(3.67)
0.144
7.28
±
0.03
0.287
±
0.001
∅
1.05
±
0.03
A
13.38
0.527
A
Pin #1
( 1.5~ Draft)
Section A-A
0.041
±
0.001
Notes:
1. Dimensions in millimeters / inches.
2. Dimensional tolerance:
±0.1mm.
3. Coplanarity of leads: 0.1mm.
4. Lead pitch tolerance:
±0.15mm.
5. Non-cumulative pitch tolerance:
±0.15mm.
6. Angular tolerance:
±3.0
7. Maximum flash: 0.2mm.
8. Chamfer (25 x 2) on the taper side of the lead.
9. () These dimensions are for reference only and should
not be used to mechanically reference the sensor.
10. Document Number: LED_Spts_20A_Pkg_001.
Figure 2. Package outline drawing
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent
damage and/or degradation which may be induced by ESD.
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
3
PixArt Imaging Inc.
E-mail:
fae_service@pixart.com.tw
PIXART [ PIXART IMAGING INC. ]
