欢迎访问ic37.com |
会员登录 免费注册
发布采购

UDA1355H 参数 Datasheet PDF下载

UDA1355H图片预览
型号: UDA1355H
PDF下载: 下载PDF文件 查看货源
内容描述: 有SPDIF接口,立体声音频编解码器 [Stereo audio codec with SPDIF interface]
分类和应用: 解码器编解码器消费电路商用集成电路光电二极管
文件页数/大小: 76 页 / 311 K
品牌: NXP [ NXP ]
 浏览型号UDA1355H的Datasheet PDF文件第68页浏览型号UDA1355H的Datasheet PDF文件第69页浏览型号UDA1355H的Datasheet PDF文件第70页浏览型号UDA1355H的Datasheet PDF文件第71页浏览型号UDA1355H的Datasheet PDF文件第72页浏览型号UDA1355H的Datasheet PDF文件第74页浏览型号UDA1355H的Datasheet PDF文件第75页浏览型号UDA1355H的Datasheet PDF文件第76页  
Philips Semiconductors  
Preliminary specification  
Stereo audio codec with SPDIF interface  
UDA1355H  
18.5 Suitability of surface mount IC packages for wave and reflow soldering methods  
SOLDERING METHOD  
PACKAGE(1)  
WAVE  
not suitable  
REFLOW(2)  
BGA, LBGA, LFBGA, SQFP, TFBGA, VFBGA  
suitable  
suitable  
DHVQFN, HBCC, HBGA, HLQFP, HSQFP, HSOP, HTQFP,  
HTSSOP, HVQFN, HVSON, SMS  
not suitable(3)  
PLCC(4), SO, SOJ  
suitable  
suitable  
LQFP, QFP, TQFP  
not recommended(4)(5) suitable  
not recommended(6)  
suitable  
SSOP, TSSOP, VSO, VSSOP  
Notes  
1. For more detailed information on the BGA packages refer to the “(LF)BGA Application Note” (AN01026); order a copy  
from your Philips Semiconductors sales office.  
2. All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum  
temperature (with respect to time) and body size of the package, there is a risk that internal or external package  
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the  
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”.  
3. These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder  
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,  
the solder might be deposited on the heatsink surface.  
4. If wave soldering is considered, then the package must be placed at a 45° angle to the solder wave direction.  
The package footprint must incorporate solder thieves downstream and at the side corners.  
5. Wave soldering is suitable for LQFP, TQFP and QFP packages with a pitch (e) larger than 0.8 mm; it is definitely not  
suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.  
6. Wave soldering is suitable for SSOP, TSSOP, VSO and VSSOP packages with a pitch (e) equal to or larger than  
0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.  
2003 Apr 10  
73  
 复制成功!