Philips Semiconductors
Preliminary specification
4 × 13 W single-ended power amplifiers
TDA8511J
Mode select switch
To avoid switch-on plops, it is advised to keep the amplifier
in the mute mode during >100 ms (charging of the input
capacitors at pins 1, 3, 15 and 17.
The circuit in Fig.7 slowly ramps up the voltage at the
mode select switch pin when switching on and results in
fast muting when switching off.
V
P
handbook, halfpage
10 kΩ
47 µF
100 Ω
mode
select
switch
100 kΩ
MGA708
Fig.7 Mode select switch circuitry.
2000 Mar 10
10