Philips Semiconductors
UM10206
I2C Demonstration Board 2005-1 Quick Start Guide
•
The self check routine selected through “Device
Training Board Self Test” allows a
thorough self test to be performed (device, electrical connection and visual check).
You can save the results of the test in a log file.
8. Upgrades and experimentation
Refer to the UM10207 User Manual for more details on the Win-I2CUSB Lite Software
and programming of different I
2
C-bus devices.
9. I2C Demonstration Board 2005-1 upgrades
You can purchase a full version of the GUI, called a Win-I2CUSBDLL kit from The
Boardshop (details are available on the website:
www.semiconductors.philips.com/products/interface_control/i2c). The microcontroller
included operates over the entire address range for all devices with a more powerful
universal mode if you need to communicate with devices or addresses not supported by
the Win-I2C Lite software.
The full version of the GUI is incompatible with the Demonstration Board
USB-to-I
2
C-bus-microcontroller. You can make the GUI work with any Demonstration
Board if you remove the microcontroller from the Win-I2CUSBDLL kit USB based I
2
C-bus
hardware adapter v2 card and insert it into the microcontroller socket on the
Demonstration Board.
Periodically daughter cards of new devices will become available and new GUIs
generated for these devices. Alternatively existing GUIs will be enhanced based on
operator feedback. The Win-I2CUSB Lite and Win-I2CUSBDLL kit software includes an
automatic update feature which keeps the software updated to most current GUIs.
UM10206
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
User manual
Rev. 01 — 13 June 2006
9 of 12
PHILIPS [ NXP SEMICONDUCTORS ]
