DSP
SAFETY STANDARDS
UL/C-UL (Recognized)
Contact rating
CSA (Certified)
Contact rating
TÜV (Certified)
Rating
Item
File No.
E43028
File No.
File No.
B 02 10
13461 238
8A 250V AC
LR26550
etc.
8A 250V AC
1/6HP 125, 250V AC
5A 30V DC
8A 250V AC (cosφ=1.0)
5A 250V AC (cosφ=0.4)
5A 30V DC
1 Form A
1/6HP 125, 250V AC
5A 30V DC
E43028
E43028
5A 250V AC
LR26550
etc.
5A 250V AC
B 02 10
13461 238
5A 250V AC (cosφ=1.0)
3A 250V AC (cosφ=0.4)
5A 30V DC
1 Form A
1 Form B
1/6HP 125, 250V AC
5A 30V DC
1/6HP 125, 250V AC
5A 30V DC
5A 250V AC
1/10HP 125, 250V AC
5A 30V DC
LR26550
etc.
5A 250V AC
1/10HP 125, 250V AC
5A 30V DC
B 02 10
13461 238
5A 250V AC (cosφ=1.0)
3A 250V AC (cosφ=0.4)
5A 30V DC
2 Form A
* Remarks: The standard certified for may differ depending on where the product was manufactured.
NOTES
1. Soldering conditions
3. External magnetic field
5. When using, please be aware that
the a contact and b contact sides of 1
Form A and 1 Form B types may go on
simultaneously at operate time and
release time.
Please obey the following conditions
when soldering automatically.
1) Preheating: Within 120°C 248°F and
within 120 seconds
2) Soldering iron: 260°C 5°C
500°F 41°F and within 6 seconds
2. Cleaning
For automatic cleaning, the boiling
method is recommended. Avoid
ultrasonic cleaning which subjects the
relays to high frequency vibrations, which
may cause the contacts to stick.
It is recommended that a fluorinated
hydrocarbon or other alcoholic solvents
be used.
Since DY relays are highly sensitive
polarized relays, their characteristics will
be affected by a strong external magnetic
field. Avoid using the relay under that
condition.
4. Coil operating power
Pure DC current should be applied to the
coil. The wave form should be
rectangular. If it includes ripple, the ripple
factor should be less than 5%.
However, check it with the actual circuit
since the characteristics may be slightly
different.
For Cautions for Use.
ASCTB180E 201202-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/