TOP232-234
TO-220-7B
.165 (4.19)
.185 (4.70)
.400 (10.16)
.415 (10.54)
.045 (1.14)
.055 (1.40)
.146 (3.71)
.156 (3.96)
.108 (2.74) REF
.236 (5.99)
.260 (6.60)
+
.570 (14.48)
REF.
.467 (11.86)
.487 (12.37)
7° TYP.
.670 (17.02)
REF.
.860 (21.84)
.880 (22.35)
.095 (2.41)
.115 (2.92)
PIN 1 & 7
PIN 4
.028 (.71)
.032 (.81)
.040 (1.02)
.060 (1.52)
PIN 1
.010 (.25) M
.015 (.38)
.020 (.51)
.040 (1.02)
.060 (1.52)
.050 (1.27) BSC
.150 (3.81) BSC
.190 (4.83)
.210 (5.33)
Notes:
.050 (1.27)
1. Controlling dimensions are inches. Millimeter
dimensions are shown in parentheses.
2. Pin locations start with Pin 1, and continue
from left to right when viewed from the front.
Pins 2 and 6 are omitted.
3. Dimensions do not include mold flash or
other protrusions. Mold flash or protrusions
shall not exceed .006 (.15mm) on any side.
4. Minimum metal to metal spacing at the pack-
age body for omitted pin locations is .068
inch (1.73 mm).
.050 (1.27)
.050 (1.27)
.200 (5.08)
.050 (1.27)
.180 (4.58)
PIN 1
PIN 7
.150 (3.81)
5. Position of the formed leads to be measured
at the mounting plane, .670 inch (17.02 mm)
below the hole center.
.150 (3.81)
MOUNTING HOLE PATTERN
Y07B
6. All terminals are solder plated.
PI-2560-033001
B
7/01
34
PAM [ POWER ANALOG MICOELECTRONICS ]
