FEATURES
z
z
z
z
z
z
z
OUTPUT CURRENT UP TO 25A
2:1 WIDE INPUT VOLTAGE RANGE
HIGH EFFICIENCY UP TO 93%
NO MINIMUM LOAD
SOFT-START
ADJUSTABLE OUTPUT VOLTAGE
UNDER-VOLTAGE LOCKOUT
• INPUT REVERSE PROTECTION
• INDUSTRY STANDARD HALF-BRICK FOOTPRINT
• SIX-SIDED CONTINUOUS SHIELD
• INPUT TO OUTPUT BASIC INSULATION
• BUS TERMINAL BLOCK OPTION
Standard
Terminal Block
OPTIONS
APPLICATIONS
z
Positive logic remote ON/OFF
Pin length
z
z
Terminal block
Heat-sink
z
Terminal block with EMC filter
Wireless Network
Telecom/ Datacom
Industry Control System
z
DESCRIPTION
HAE100-SERIES DC/DC converters provide up to 100 watts of output power in an
industry standard half-brick package and footprint. All models feature a wide input
range and adjustable output voltage.
Distributed Power Architectures
Semiconductor Equipment
T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25℃ otherwise noted
OUTPUT SPECIFICATIONS
Output power
GENERAL SPECIFICATIONS
100Watts, max. Efficiency
See table
Input to Output (Basic insulation)
Input (Output) to Case
2250VDC, min.
1600VDC, min.
109ohms, min.
2500pF, max.
300KHz, typ.
Voltage accuracy
Full load and Vin, nom
±1%
+10%, -20%
0%
Isolation voltage
Voltage adjustability (Note 7)
Minimum load
Isolation resistance
Isolation capacitance
Switching frequency
Design meet safety standard
Case material
Line regulation
LL to HL at FL
See table
See table
Load regulation
No Load to Full Load
IEC60950-1, UL60950-1, EN60950-1
Remote sense (Note 8)
Ripple and noise
10% of Vout, nom
See table
Metal
FR4 PCB
20MHz bandwidth
Base material
Temperature coefficient
Transient response recovery time
Over voltage protection threshold
Over current protection threshold
Short circuit protection
±0.02%/ ℃, max.
Potting material
Silicon (UL94-V0)
25% load step change
200μS
2.40 X 2.28 X 0.50 Inches
(61.0×57.9×12.7 mm)
Dimensions
Weight
(Hiccup)
115% ~ 130% of Vout, nom
110% ~ 140% of Iout Rated
Hiccup, automatics recovery
97g (3.42oz)
1.010 x 106 hrs
7.416 x 104 hrs
BELLCORE TR-NWT-000332
MIL-HDBK-217F
MTBF (Note 1)
INPUT SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
12V nominal input
24V nominal input
48V nominal input
12V nominal input
24V nominal input
48V nominal input
12V nominal input
24V nominal input
48V nominal input
9 – 18VDC
18 – 36VDC Operating ambient
36 – 75VDC temperature (Note10)
Input voltage range
Without Heat-sink
-40℃ ~ +35℃ (without derating)
+35℃ ~ +77℃ (with derating)
-40℃ ~ +50℃ (without derating)
+50℃ ~ +82℃ (with derating)
-40℃ ~ +30℃ (without derating)
+30℃ ~ +81℃ (with derating)
-40℃ ~ +44℃ (without derating)
(For 3.3,5,12,15Vout)
8.5VDC
17.5VDC
35.5VDC
7.5VDC temperature (Note10)
16VDC (For 24,28,48Vout)
34VDC
With Heat-sink
(0.24” Height)
Without Heat-sink
Start-up voltage
Operating ambient
Shutdown voltage
With Heat-sink
(0.24” Height)
+44℃ ~ +85℃
(with derating)
Input filter
Pi type
Maximum case temperature
105℃
Input surge voltage 100mS max
12V nominal input
24V nominal input
48V nominal input
36VDC
50VDC
100VDC
Over temperature protection
115℃
Storage temperature range
Thermal impedance without Heat-sink
-55℃ to +125℃
6.7℃/watt
5.4℃/watt
4.7℃/watt
Input reverse protection (Note 9)
Parallel diode
(Note 11)
with 0.24" Height Heat-sink
with 0.45" Height Heat-sink
Vin, nom and
constant resistive load Remote ON/OFF
Power up
25mS, typ.
25mS, typ.
Start up time
Thermal shock
Vibration
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 12V Relative humidity
Open or 3V < Vr < 12V
Short or 0V < Vr < 1.2V
-0.5mA ~ 1mA
3mA
MIL-STD-810F
MIL-STD-810F
5% to 95% RH
Remote ON/OFF (Note 6)
(Negative logic) (Standard)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
(Positive logic) (Option)
EMC CHARACTERISTICS (Note 12)
EMI
EN55022
Class A
Input current of Remote control pin Vin(nom)
Remote off input current Vin(nom)
Air
Contact
± 8KV
± 6KV
ESD
EN61000-4-2
Perf. Criteria A
Radiated immunity
Fast transien
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
10 V/m Perf. Criteria A
± 2KV Perf. Criteria A
± 1KV Perf. Criteria A
10 Vr.m.s Perf. Criteria A
Surge
Conducted immunity
Page 1 of 5 Issued Date：2009/01/13
P-DUKE [ POWER MATE TECHNOLOGY CO., LTD ]
