Product Brief
TransDimension
TD243
TD243 Reference Designs, Evaluation/Demo Boards and Developer Kits
Reference Designs
A growing number of designs are available with worldwide support from TransDimension. The current reference
designs listed below include schematics, application notes and instructions on how to interface to the associated
microprocessor of interest. In addition, software is available for specific operating systems including: WinCE,
Linux, uCLinux, VxWorks, Nucleus, Lynx, QNX, Symbian OS, OS20, OS40, pSOS, PowerTV, SMX, ThreadX,
VRTX, ITRON, MS-DOS operating systems. Contact your local TransDimension representative for ordering
information of additional new reference designs for other microprocessors, CISC, RISC, and DSP’s including
Fujitsu SPARCLite, NEC and Toshiba MIPS, Motorola PowerPC, among others.
ꢀ TD243 / Intel StrongARM
ꢀ TD243 / Intel XScale (PXA250)
ꢀ TD243 / Hitachi SH-3 / SH-4
ꢀ TD243 / Motorola Dragonball
ꢀ TD243 / Motorola ColdFire 5272
ꢀ TD243 / ARM7
USB On-The-Go Reference Design
USB On-The-Go Reference Design
USB On-The-Go Reference Design
USB On-The-Go Reference Design
USB On-The-Go Reference Design
USB On-The-Go Reference Design
Evaluation / Demo Kits
EVB243: Evaluation Board with TD243 silicon in LQFP package
The EVB243 is a small board (3.5”x3.5”) that brings out all of the pins necessary to interface with microprocessors
available on the market, today. The board has 3 USB receptacles (one USB OTG mini-AB and two standard USB
host receptacles) ready to connect to any USB peripheral, hub or USB host. The main components on the EVB243
board consist of the TD243 silicon in 100-pin LQFP, a microprocessor interface connector and Vbus
distribution/manipulation electronic circuitry. Please see your local TransDimension sales representative for
ordering information and specifications.
PCE243: PCI card with TD243 silicon in LQFP package
The PCE243 card and associated documentation contains everything you need to perform an evaluation of the
functionality and development on the TD243 chip, in a PCI bus environment. The PCE243 card is a standard PCI
card that may be inserted into any PCI slot, inside a personal computer or laptop docking station.
ꢀ TD243 / PCI USB On-The-Go Evaluation card
The PCE243 card may be used in any 33 MHz PCI system. The PCE243 will automatically adjust to a 3.3V or 5V
PCI environment. The PCE243 PCI card quickly allows customers to start developing software around the TD243
controller. Once the PCE243 card has been installed, the user will gain access to all of the development software
kits available with the chosen operating system. TransDimension will supply the drivers necessary to evaluate the
PCE243 PCI card in both OTG and Host mode simultaneously, in the Microsoft MS-DOS based operating systems
and Linux operating systems.
The PCE243 card has three USB receptacles (one USB OTG mini-AB and two standard USB host receptacles)
supporting connectivity between the PCI based system and USB peripherals, hubs and other USB hosts. Please
see your local TransDimension sales representative for ordering information and specifications.
TransDimension Inc. — Proprietary
5
OXFORD [ OXFORD SEMICONDUCTOR ]
