NCP729
200 mA Ultra-Low Noise
Very-Low Iq, High PSRR,
LDO Linear Voltage
Regulator
The NCP729 is a 200 mA LDO suitable to provide clean analog
power supply rails for noise sensitive applications. This device
features Ultra−Low Noise performance, High Power Supply Rejection
Ratio and Very good transient response characteristics. Very Low
Dropout and Very Low Quiescent Current makes this LDO an
attractive choice for wide range of battery powered, portable products.
Current Limit and Thermal Shutdown provide protection during
failure conditions. NCP729 is available in 1.06 mm x 1.06 mm Chip
Scale Package and it is stable with small 1
mF
Ceramic capacitors.
Features
http://onsemi.com
4 BUMP CSP
FC SUFFIX
CASE 568AD
DEVICE MARKING INFORMATION
A1
XXX
YWW
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Operating Input Voltage Range: 2.0 V to 5.5 V
Fixed Voltage Options Available: 0.8 V to 3.5 V
Very Low Quiescent Current: Max. 50
mA
over Temperature
Ultra Low Noise: 10
mV
RMS
from 100 Hz to 100 kHz
Very Low Dropout: 86 mV Typical at 200 mA
±2%
Accuracy over Full Load, Line and Temperature Variations
High PSRR: 72 dB at 1 kHz
Thermal Shutdown and Current Limit Protections
Stable with a 1
mF
Ceramic Output Capacitor
Available in 1.06 mm x 1.06 mm 4−bump CSP Package
Active Output Discharge for Fast Turn−Off
These are Pb−free Devices
XXX = Specific Device Code
Y
= Year
WW = Work Week
PIN CONNECTIONS
EN
A1
B1
GND OUT
(Top View)
IN
A2
B2
Typical Applications
PDAs, Tablets, GPS, Smartphones
Wireless Handsets, Wireless LAN, Bluetooth, Zigbee
Portable Medical Equipment
Other Battery Powered Applications
V
IN
C
IN
OFF
V
OUT
C
OUT
1
mF
Ceramic
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
IN
ON
EN
NCP729
GND
OUT
Figure 1. Typical Application Schematic
©
Semiconductor Components Industries, LLC, 2012
August, 2012
−
Rev. 1
1
Publication Order Number:
NCP729/D