XG5 Accessories
■ Top Lock Levers
XG4Z-0002 - “Lock Lever II”
XG5Z-0002 - “Lock Lever”
Use to lock XG4C Box-type Plugs.
Use to lock unshrouded right-angle Plugs (XG8B and XG8W) to
XG5 or XG4 mating sockets.
Material: Polyamide resin
(UL94V-2)/natural
Material: Polyamide resin
(UL94V-2)/natural
Mounting the Lock Lever
Model
XG5Z-0002
For Sockets with polarity guides, mount the
Lock Lever to the tab to lock the Socket to the
Unshrouded Plug as shown in the diagram on
the right.
XG4Z-0002
■ Spare Contacts
XG5W-0031-N (Size #1)
XG5W-0034-N (Size #2)
Model
XG5W-0031-N
XG5W-0034-N
Size no.
Note: 1. These Contacts can be used as re-
placements if a wrong connection
is made.
2. The applicable wire for size No. 1 is
AWG24 (UL-1061). The applicable
wire for size No. 2 is AWG26 to
AWG28 (UL-1007).
Contact Removal Tool
Replacing Contacts
XY2E-0001
Use only this tool to remove incorrect IDC contacts.
1. Remove the cover.
2. Insert the tool into the housing lance holes and push the lance
Contact
Removal Tool
into the housing.
3. Pull out the contact while holding the lance down.
4. Insert a new contact.
Used to remove from the housing, contacts which need to be
replaced or reconfigured.
XY2E-0001
Lance hole
Housing
■ XG5 IDC Assembly Tools
See the “XG@ - Assembly Tooling and Accessories” datasheet for details regarding manual and automated IDC Termination tools (part numbers
XY2B-7006 and XY2B-2104-N)
IDC Sockets for Discrete Wires XG5
69
OMRON [ OMRON ELECTRONICS LLC ]
