Dimensions
■ Terminals
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. The following table is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact specifications.
For terminal positions, refer to the above Contact Form
3. Right-angle PCB terminal type is available with some models (not shown). Drawings will be provided if requested.
D5: Pins at right angles, to the right
D6: Pins at right angle, to the left
Terminal type
Solder Terminal
(A)
Quick-connect Terminal
Quick-connect Terminal
(#250) (C)
(#187) (C2)
COM
bottom position
(5.5)
(6.5)
(5.5)
(6.5)
(4.9)
(7.7)
3.2
2.9
2.9
(10)
(10)
(12.0)
t = 0.8
Three, quick-connect
terminals (#250)
t = 0.5
t = 0.5
Three, quick-connect
terminals (#187)
Three, solder terminals
COM
side position
(5.5)
(5.5)
(6.5)
(4.9)
(7.7)
(6.5)
2.4
2.4
3.6
(10)
(12.0)
(10)
Terminal
dimensions
6.35
3.2 (see note)
8.1
6.35
3.2
3.95
4.75 0.1
4.75 0.1
6.35 0.1
2.4 dia. 1.6 dia.
1.6-dia. terminal hole
1.65-dia. terminal hole
Note: Indicates the length to the
center of the 1.6-dia. holes
128
Snap Action Switch V