A165E
Installation
Mounting to the Panel (Models with Separate Construction)
After installing the Operation Unit, snap in the Switch from the back of the panel.
(1) Installing the Operation Unit
• Attach rubber packing or the
Yellow Plate onto the Operation
Unit from its terminal side. Insert
the Operation Unit into the panel
from the front. Install the lock ring
and mounting nut from the
Panel
terminal side and tighten.
• Adjust the slits on the hole of
rubber packing and Yellow Plate
Mounting nut
Lock
to the protruding part of the Unit.
• Rubber packing is not necessary
Rubber packing
when the Yellow Plate is used.
• Tighten the nut to the torque of
0.29 to 0.49 N·m.
Cutout
(included with the
product) or Yellow
Plate (sold separately)
• The Operation Unit should be
installed with its
Lock ring (included
with the product)
protruding part adjusted to the slit
of the panel hole.
• Align the lock ring to the groove of
the Operation Unit so that the
edge is drawn to the panel side.
Edge
Panel
Lock hole
Lock ring (included
with the product)
Mounting nut (included
with the product)
Rubber packing (included with the product)
or Yellow Plate (sold separately)
(2) Mounting the Switch
(3) Removing the Switch
• Snap on the Switch to the Operation Unit.
• Insert the prongs of the A16Z-5080 Extractor between the Switch and the
Operation Unit, grip the Switch, and pull to remove.
• Make sure that the Switch has the correct orientation when snapping it onto the
Operation Unit.
• Align the white dot on the Operation Unit with the guide groove on the side of
the Switch marked with an “L” as shown below, and push the Switch into the
Operation Unit until it clicks into place. Confirm that the Switch is securely in
place before using.
Guide groove
White dot
Extractor (A16Z-5080)
L marking
(4) Installing the LED Lamp
• When mounting the Lamp, make sure it is facing the direction shown in the
following diagram. Insert the Lamp while matching the protruding part of the
Lamp and the small guides on the outer surface of the switch.
Narrow guide
Protruding part
Wide guide
8
OMRON [ OMRON ELECTRONICS LLC ]
