Note that the 61F-GP-N8 Conductive Level Controller is capable of
controlling liquids with specific resistances of up to 30 kΩ-cm when
the Controller employs a PS-3S electrode holder with the elec-
trode(s) submerged to a depth of 30 mm max.
Kind of water
City water
Well water
Industrial water
Rainwater
Sea water
Sewage
Distilled water
Specific resistance
5 to 10 kΩ-cm
2 to 5 kΩ-cm
5 to 15 kΩ-cm
15 to 25 kΩ-cm
0.03 kΩ-cm
0.5 to 2 kΩ-cm
100 kΩ-cm or less
Over 100 kΩ-cm
Applicable type
Standard type
Standard type
Standard type
Standard type
Low-sensitivity type
Low-sensitivity type
High-sensitivity type
Consult OMRON
Precautions
Level
Controllers
I
How to Mount Electrodes
Connecting Electrodes to Electrode Holders
Electrode holder
Clamp screw
Connecting nut
1. Spin a lock nut and a spring
washer onto the electrode.
3. Tighten the electrode with
the two clamp screws.
Spring washer
4. Secure the connecting
nut by tightening the lock
nut and spring washer.
Lock nut
Electrode
2. Fully fit the electrode into the
connecting nut attached to the
electrode holder.
Connecting One Electrode to Another
Electrode
Lock nut
Spring washer
Connecting nut
Spring
washer
2. Fully fit the
electrode into the
connecting nut
attached to the
electrode holder.
3. Tighten the electrode with
the two clamp screws.
4. Secure the connecting
nut by tightening the lock
nut and spring washer.
1. Spin a lock nut and a spring
washer onto the electrode.
Conductive Level Controller
61F-GP-N8
E-13
OMRON [ OMRON ELECTRONICS LLC ]
