61F-D21T-V1
Dimensions
61F-D21T-V1
22.5
100
Unit: mm
(5)
*Installation Procedure: Mount to the DIN Rail or with front screws
*Dimensions for Mounting with Front Screws
102
Two, M4 screws or Two, 4.5-dia. holes
Note:
When mounting with front screws, draw out the hooks on
the bottom of the product on the left and right sides.
Installation Procedure
•
Pull down the hook, fasten the upper tab onto the Rail, and then
press the Controller onto the Rail until the hook locks into place.
DIN Rail
Attach the 61F-D21T-V1 to a DIN Rail.
•
DIN Rails: PFP-100N (1,000 mm)
PFP-50N (500 mm)
Separator
•
F03-14
Recommended Crimp Terminals
Recommended crimp terminal Recommended cable diameter
AI 1,5-8BK
(Phoenix Contact)
AI 1-8RD
(Phoenix Contact)
AWG16
AWG18
AWG18
Uninstallation Procedure
•
Using a flat-blade screwdriver or a similar tool, pull down the hook
and lift the Controller from the bottom.
AI 0,75-8GY
(Phoenix Contact)
(5)
72
90
5
OMRON [ OMRON ELECTRONICS LLC ]
