Dimensions
■ Terminals
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. Terminal plate thickness is 0.5 mm for all models.
Quick-connect Terminals (#110)
Solder Terminals
PCB Terminals
0.6
2.9
3.3
2.9
1.6
2.9
7.0
6.4
10.6
7.1
1.6
0.5
3.2
8.8
7.3
1.2
2.8
8.8
7.3
1.6
Three,
1.6-dia. holes
8.8
7.3
COM
terminal
(C)
9.5 0.1
COM
terminal
(C)
3.2
6.4
9.5 0.1
3.2
19.8
t = 0.5
9.5 0.1
19.8
Three, 1.2 dia.
19.8
NO terminal
COM terminal (C)
NC terminal
NO terminal
NC terminal
NO terminal
NC terminal
Note:Terminal plate thickness is 0.5 mm for all models.
PCB, Left-angled terminal
PCB, Right-angled terminal
Note: Angled terminal directions
are shown below.
Left-angled terminal
Right-angled terminal
COM
terminal
COM
terminal
NC
terminal
NC terminal
NO terminal
NO terminal
■ Dimensions and Operating Characteristics
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. The following illustrations and dimensions are for solder terminal models.
Refer to “Terminals” for models with quick-connect terminals (#110) or PCB terminals.
3. The operating characteristics are for operation in the A direction(
)
Pin Plunger Models
7.5
PT
3.2
SS-01(-E, -F)
2
SS-5(-F)
SS-10
A
+0.075
–0.05
2.35
OP
9.5
10.2
2.9
2.5
6.4
6.4
2.5 0.07 dia.
1.6
+0.075
–0.05 dia. holes
3.2
6.4
2.35
Three, 1.6 dia.
8.8
7.3
5.1 9.5 0.1
19.8
Characteristics
Part number
SS-01-E
25 g
2 g
0.5 mm
0.5 mm
0.1 mm
SS-01-F, SS-5-F
50 g
SS-01, SS-5
150 g
SS-10
150 g
25 g
0.6 mm
0.4 mm
0.12 mm
OF max.
RF min.
PT max.
OT min.
MD max.
OP
4 g
0.5 m
0.5 mm
0.1 mm
25 g
0.5 mm
0.5 mm
0.1 mm
8.4 0.5 mm
Snap Action Switch SS
99
OMRON [ OMRON ELECTRONICS LLC ]
