Model Number Legend
SS-
1 2 3 4 5
(see note)
3. Maximum Operating Force
5. Terminals
None: Solder terminals
1. Ratings
None: 150 gf
-F:
-E:
10:
5:
10.1 A at 125 VAC
5 A at 125 VAC
0.1 A at 30 VDC
T:
Quick-connect terminals (#110)
Straight PCB terminals
50 gf (0.1A and 5A versions)
25 gf (0.1A versions)
D:
01:
D1:
D2:
Left-angled PCB terminals
Right-angled PCB terminals
2. Actuator
None: Pin plunger
GL: Hinge lever
4. Contact Form
None: SPDT
Note: These OF values are for the pin plunger models.
-2:
-3:
SPST-NC
SPST-NO
Consult Omron regarding the following:
- SPST-NC and SPST-NO versions
- High temperature versions that are rated from -25°C to 120°C
- Left and Right angled PCB terminal versions
GL13: Simulated roller lever
GL2: Hinge roller lever
Specifications
■ Characteristics
Operating speed
0.1 mm to 1 m/second (pin plunger models)
Operating frequency
Mechanical: 400 operations per minute max.
Electrical: 30 operations per minute max.
Insulation resistance
Contact resistance
100 MΩ at 500 VDC
150 gf: SS-10, SS-5 models:
SS-01 models:
30 mΩ max.
50 mΩ max.
50 mΩ max.
100 mΩ max.
150 mΩ max.
50 gf:
SS-5 models:
SS-01 models
SS-01 models
25 gf:
Dielectric strength (See note 2)
1,000 VAC (600 VAC for SS-01), 50/60 Hz for 1 minute between terminals of same polarity
1,500 VAC, 50/60 Hz for 1 minute between current-carrying metal parts and ground and between each
terminal and noncurrent-carrying metal parts
Vibration resistance (see note 3)
Shock resistance (see note 3)
Malfunction: 10 to 55 Hz, 1.5 mm double amplitude
150 gf:
Destruction: 1,000 m/s2 (approx. 100G) max.
Malfunction: 300 m/s2 (approx. 30G) max.
Destruction: 500 m/s2 (approx. 50G) max.
Malfunction: 200 m/s2 (approx. 20G) max.
50 gf and 25gf:
Degree of protection
IEC IP40
Class I
Degree of protection against
electric shock
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Service life
175
-25° to 85°C (at 60% RH max.) with no icing
85% max. (for 5°C to 35°C)
Mechanical:
30 million operations min. at 60 operations per minute (SS-01, SS-5)
10 million operations min. at 60 operations per minute (SS-10)
Electrical:
200,000 operations min. at 30 operations per minute (SS-01, SS-5)
50,000 operations min. at 30 operations per minute (SS-10)
Weight
Approx. 1.6 g pin plunger type
Note: 1. Data shown are of initial value.
2. The dielectric strength values shown is measured using a separator between the switch and metal mounting plate.
3. For pin plunger models, the above value apply for use at the free position and total travel position. For the lever models, the values apply
at the total travel position.
96
Snap Action Switch SS
OMRON [ OMRON ELECTRONICS LLC ]
