FEDL 7012-03-01
1
Semiconductor
ML7012-03
CMD
&T
Style
Function
Controls the loop back test mode.
n = 0: None
n = 1: Starts local analog loop back test (ALB)
n = 2, 3: None
Initial Value
Note
AT&Tn
n = 4: Responds to the RDL test requirement
n = 5: Does not respond to the RDL test requirement
n = 6: Starts remote digital loop back test (RDL)
n = 7: Starts RDL self-diagnostic test.
n = 8: Starts ALB self-diagnostic test.
Selects automatic re-training function due to poor incoming
conditions of the receive section.
n = 0: Automatic re-training is invalid.
n = 1: Automatic re-training is valid.
Checks the line type and displays the result.
n = 0: Checks PBX or direct line.
n = 1: Checks pulse or tone line.
Selects data control mode.
—
%E
\L
AT%En
AT\Ln
1
—
n = 0,1: Selects normal mode (without error correction).
n = 2-5: None
\N
AT\Nn
n = 6: Selects reliable mode. Disconnects the line when
MNP connection is not available.
n = 7: Selects auto-reliable mode. Connects in normal mode
when MNP connection is not available.
Selects the flow control between DTE and modem.
n = 0: No flow control
7
\Q
\V
AT\Qn
AT\Vn
n = 1: None
n = 2: None
n = 3: Bi-directional control by CTS/RTS
Selects extended result code.
n = 0: Displays the normal result code.
n = 1: Displays the result code with the mode of the MNP
connection.
3
0
n = 2, 3: None
13/22
OKI [ OKI ELECTRONIC COMPONETS ]
