ML696201 and ML69Q6203
Preliminary
Notice
The information contained herein can change without notice owing to product and/
or technical improvements.
ucts are not, unless specifically authorized by Oki, authorized for use in any
system or application that requires special or enhanced quality and reliability char-
acteristics nor in any system or application where the failure of such system or
application may result in the loss or damage of property, or death or injury to
humans. Such applications include, but are not limited to: traffic control, automo-
tive, safety, aerospace, nuclear power control, and medical, including life support
and maintenance.
Certain parts in this document may need governmental approval before they can
be exported to certain countries. The purchaser assumes the responsibility of
determining the legality of export of these parts and will take appropriate and nec-
essary steps, at their own expense, for export to another country.
Oki Semiconductor reserves the right to make changes in specifications at any-
time and without notice. This information furnished by Oki Semiconductor in this
publication is believed to be accurate and reliable. However, no responsibility is
assumed by Oki Semiconductor for its use; nor for any infringements of patents or
other rights of third parties resulting from its use. No license is granted under any
patents or patent rights of Oki.
Please make sure before using the product that the information you are referring
to is up-to-date.
The outline of action and examples of application circuits described herein have
been chosen as an explanation of the standard action and performance of the
product. When you actually plan to use the product, please ensure that the out-
side conditions are reflected in the actual circuit and assembly designs.
Oki assumes no responsibility or liability whatsoever for any failure or unusual or
unexpected operation resulting from misuse, neglect, improper installation, repair,
alteration or accident, improper handling, or unusual physical or electrical stress
including, but not limited to, exposure to parameters outside the specified maxi-
mum ratings or operation outside the specified operating range.
Neither indemnity against nor license of a third party's industrial and intellectual
property right,etc.is granted by us in connection with the use of product and/or the
information and drawings contained herein. No responsibility is assumed by us for
any infringement of a third party's right which may result from the use thereof.
When designing your product, please use our product below the specified maxi-
mum ratings and within the specified operating ranges, including but not limited to
operating voltage, power dissipation, and operating temperature.
The products listed in this document are intended for use in general electronics
equipment for commercial applications (e.g., office automation, communication
equipment, measurement equipment, consumer electronics, etc.). These prod-
Trademarks:
µPlat is a trademark of Oki Semiconductor. ARM, ARM7TDMI, and the ARM Pow-
ered Logo are registered trademarks, and AMBA, ARM7, and Multi-ICE are
trademarks of Advanced RISC Machines, Ltd.
Copyright 2003 Oki Semiconductor
Regional Sales Offices – Semiconductor Products
Northwest Area
Southwest and
South Central Area
785 N. Mary Avenue
Sunnyvale, CA 94085
Tel: 408/720-1900
Fax:408/720-8965
1902 Wright Place, Suite 200
Carlsbad, CA 92008
Tel: 760/918-5830
Fax:760/918-5505
Northeast Area
Southeast Area
Shattuck Office Center
138 River Road
4800 Whitesburg Drive # 30
Andover, MA 01810
Tel: 978/688-8687
Fax:978/688-8896
PMB 263
Huntsville, AL 35802
Tel: 256/520-8035
Fax:408/737-6417
North Central Area
1450 East American Lane, Suite 1400
Schaumburg, IL 60143
Tel: 847/330-4494
847/330-4498
Fax:847/330-4491
Oki Web Site:
http://www.okisemi.com/us
Corporate Headquarters
785 N. Mary Avenue
Sunnyvale, CA 94085-2909
Tel: 408/720-1900
Fax:408/720-1918
OKI [ OKI ELECTRONIC COMPONETS ]
