The information contained herein can change without notice owing to product and/or technical improvements.
Please make sure before using the product that the information you are referring to is up-to-date.
The outline of action and examples of application circuits described herein have been chosen as an explanation of the
standard action and performance of the product. When you actually plan to use the product, please ensure that the outside
conditions are reflected in the actual circuit and assembly designs.
Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from
misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical
stress including, but not limited to, exposure to parameters outside the specified maximum ratings or operation outside the
specified operating range.
Neither indemnity against nor license of a third party's industrial and intellectual property right,etc.is granted by us in
connection with the use of product and/or the information and drawings contained herein. No responsibility is assumed by
us for any infringement of a third party's right which may result from the use thereof.
When designing your product, please use our product below the specified maximum ratings and within the specified
operating ranges, including but not limited to operating voltage, power dissipation, and operating temperature.
The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,
office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not,
unless specifically authorized by Oki, authorized for use in any system or application that requires special or enhanced quality
and reliability characteristics nor in any system or application where the failure of such system or application may result in the
loss or damage of property, or death or injury to humans.
Certain parts in this document may need governmental approval before they can be exported to certain countries. The
purchaser assumes the responsibility of determining the legality of export of these parts and will take appropriate and
necessary steps, at their own expense, for export to another country.
µPlat is a trademark of Oki Semiconductor. AMBA and THUMB are trademarks, and ARM, ARM7TDMI, and the ARM
powered logo are registered trademarks of Advanced RISC Machines, Ltd.
Copyright 2002 Oki Semiconductor
Oki Semiconductor reserves the right to make changes in specifications at anytime and without notice. This information
furnished by Oki Semiconductor in this publication is believed to be accurate and reliable. However, no responsibility is
assumed by Oki Semiconductor for its use; nor for any infringements of patents or other rights of third parties resulting from
its use. No license is granted under any patents or patent rights of Oki Semiconductor.
OKI [ OKI ELECTRONIC COMPONETS ]
