FEDL63193-04
Semiconductor
1
ML63193
MASK OPTION
In the ML63193 uses the mask option to specify the following functions:
•
Low-Speeed clock oscillation circuit
Specify the crystal oscillation circuit or the RC oscillation circuit for the low-speed clock oscillation
circuit.
•
Reset signal sampling
Specify whether or not the reset signal will be sampled at 2 kHz.
When specifying “will carry out 2 kHz sampling,” hold the RESET pin at a “H” level for 1 ms or more.
To use the mask option, assign mask option data in the application program in accordance with the formats below.
The mask option area is an application program execution disabled area.
Mask Option Data Assignment Format
Function
Low-speed clock oscillation circuit
(crystal oscillation circuit/RC oscillation circuit)
Reset signal sampling
(will/will not carry out 2 kHz sampling)
0FFE0H
bit 1
Mask option area
bit
bit 0
data
0
1
0
1
Option to be selected
Crystal oscillation circuit
RC oscillation circuit
Will carry out 2 kHz sampling
Will not carry out 2 kHz sampling
4/37
OKI [ OKI ELECTRONIC COMPONETS ]
