LPC2212/2214
NXP Semiconductors
16/32-bit ARM microcontrollers
I 16 kB on-chip static RAM and 128/256 kB on-chip flash program memory. 128-bit wide
interface/accelerator enables high speed 60 MHz operation.
I In-System Programming (ISP) and In-Application Programming (IAP) via on-chip
bootloader software. Flash programming takes 1 ms per 512 B line. Single sector or
full chip erase takes 400 ms.
I EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with the
on-chip RealMonitor software as well as high speed real-time tracing of instruction
execution.
I Eight-channel 10-bit ADC with conversion time as low as 2.44 µs.
I Two 32-bit timers (with four capture and four compare channels), PWM unit (six
outputs), Real-Time Clock and Watchdog.
I Multiple serial interfaces including two UARTs (16C550), Fast I2C-bus (400 kbit/s) and
two SPIs.
I Vectored Interrupt Controller with configurable priorities and vector addresses.
I Configurable external memory interface with up to four banks, each up to 16 MB and
8/16/32-bit data width.
I Up to 112 general purpose I/O pins (5 V tolerant). Up to nine edge or level sensitive
external interrupt pins available.
I 60 MHz maximum CPU clock available from programmable on-chip Phase-Locked
Loop with settling time of 100 µs.
I On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz.
I Two low power modes, Idle and Power-down.
I Processor wake-up from Power-down mode via external interrupt.
I Individual enable/disable of peripheral functions for power optimization.
I Dual power supply:
N CPU operating voltage range of 1.65 V to 1.95 V (1.8 V ± 0.15 V).
N I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads.
3. Ordering information
Table 1.
Ordering information
Type number
Package
Name
Description
Version
LPC2212FBD144
LQFP144 plastic low profile quad flat package; 144 leads; SOT486-1
body 20 × 20 × 1.4 mm
LPC2212FBD144/00 LQFP144 plastic low profile quad flat package; 144 leads; SOT486-1
body 20 × 20 × 1.4 mm
LPC2212FBD144/01 LQFP144 plastic low profile quad flat package; 144 leads; SOT486-1
body 20 × 20 × 1.4 mm
LPC2214FBD144
LQFP144 plastic low profile quad flat package; 144 leads; SOT486-1
body 20 × 20 × 1.4 mm
LPC2214FBD144/00 LQFP144 plastic low profile quad flat package; 144 leads; SOT486-1
body 20 × 20 × 1.4 mm
LPC2214FBD144/01 LQFP144 plastic low profile quad flat package; 144 leads; SOT486-1
body 20 × 20 × 1.4 mm
LPC2212_2214_4
© NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 04 — 3 January 2008
2 of 45
NXP [ NXP ]
