LMV1091
Units
(Limits)
Symbol
Parameter
Conditions
Typical Limit
GA0, GA1, GA2, GA3, GB0, GB1, GB2,
Mute1, Mute2,
Mode 0, Mode 1, SD
VIH
VIL
Logic High Input Threshold
1.4
0.4
V (min)
V (max)
GA0, GA1, GA2, GA3, GB0, GB1, GB2,
Mute1, Mute2,
Logic Low Input Threshold
Mode 0, Mode 1, SD
Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability
and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in
the Recommended Operating Conditions is not implied. The Recommended Operating Conditions indicate conditions at which the device is functional and the
device should not be operated beyond such conditions. All voltages are measured with respect to the ground pin, unless otherwise specified.
Note 2: The Electrical Characteristics tables list guaranteed specifications under the listed Recommended Operating Conditions except as otherwise modified
or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not guaranteed.
Note 3: The maximum power dissipation must be de-rated at elevated temperatures and is dictated by TJMAX, θJC, and the ambient temperature TA. The maximum
allowable power dissipation is PDMAX = (TJMAX – TA) / θJA or the number given in the Absolute Maximum Ratings, whichever is lower. For the LMV1091, TJMAX
=
150°C and the typical θJA for this microSMD package is 70°C/W and for the LLP package θJA is 64°C/W. Refer to the Thermal Considerations section for more
information.
Note 4: Human body model, applicable std. JESD22-A114C.
Note 5: Machine model, applicable std. JESD22-A115-A.
Note 6: Typical values represent most likely parametric norms at TA = +25°C, and at the Recommended Operation Conditions at the time of product
characterization and are not guaranteed.
Note 7: Datasheet min/max specification limits are guaranteed by test, or statistical analysis.
Note 8: Default value used for performance measurements.
Note 9: Guaranteed by design.
7
www.national.com
NSC [ National Semiconductor ]
