Architecture Overview (Continued)
1.7 GEODE GXLV/CS5530 SYSTEM DESIGNS
A GXLV processor and Geode CS5530 I/O companion
based design provides high performance using 32-bit x86
processing. The two chips integrate video, audio and
memory interface functions normally performed by exter-
nal hardware. The CS5530 enables the full features of the
GXLV processor with MMX support. These features
include full VGA and VESA video, 16-bit stereo sound,
IDE interface, ISA interface, SMM power management,
and IBM’s AT compatibility logic. In addition, the CS5530
provides an Ultra DMA/33 interface, MPEG1 assist, and
AC97 Version 2.0 compliant audio.
designs that need to interface to a Dual Scan Super
Twisted Pneumatic (DSTN) panel (instead of a TFT
panel).
Figure 1-3 shows an example of a CS9210 interface in a
typical GXLV/CS5530 based system design. The CS9210
converts the digital RGB output of the CS5530 to the digi-
tal output suitable for driving a color DSTN flat panel LCD.
It can drive all standard color DSTN flat panels up to a
1024x768 resolution.
Figures 1-4 and 1-5 show the signal connections between
the GXLV processor and the CS5530. For connections to
the CS9210, refer to the CS9210 data book.
Figure 1-2 shows a basic block system diagram which
also includes the Geode CS9210 graphics companion for
MD[63:0]
SDRAM
Port
YUV Port
(Video)
SDRAM
Geode™
GXLV
Processor
Clocks
Serial
Packet
RGB Port
(Graphics)
CRT
USB
(2 Ports)
PCI Interface
PCI Bus
TFT
Panel
Speakers
Graphics Data
Video Data
Analog RGB
Geode™
CS5530
I/O Companion
CD
ROM
Audio
AC97
Codec
Digital RGB (to TFT or DSTN Panel)
IDE Control
Geode™
CS9210
Graphics
Companion
Micro-
phone
Super
I/O
IDE
Devices
BIOS
14.31818
MHz Crystal
GPIO
ISA Bus
DC-DC & Battery
DSTN Panel
Figure 1-2. Geode™ GXLV/CS5530 System Block Diagram
Revision 1.1
13
www.national.com
NSC [ National Semiconductor ]
