Nichia STSE-CC6130A
<Cat.No.061218>
6.RELIABILITY
(1) TEST ITEMS AND RESULTS
Standard
Number of
Test Item
Resistance to
Test Method
Test Conditions
Tsld=260°C, 10sec.
Note
Damaged
0/10
2 times
Soldering Heat
(Reflow Soldering)
Temperature Cycle
JEITA ED-4701
100 105
-40°C ~ 25°C ~ 100°C ~ 25°C
30min. 5min. 30min. 5min.
Ta=100°C
100 cycles
500hrs.
500hrs.
500hrs.
500hrs.
500hrs.
500hrs.
500hrs.
48min.
0/10
0/10
0/10
0/10
0/10
0/10
0/10
0/10
0/10
High Temperature Storage
Low Temperature Storage
JEITA ED-4701
200 201
JEITA ED-4701
200 202
Ta=-40°C
Steady State Operating Life
Condition 1
Ta=25°C, IF=500mA
Tested with Nichia standard circuit board.ꢀ
Steady State Operating Life
Condition 2
Ta=25°C, IF=700mA
Tested with Nichia standard circuit board.ꢀ
Ta=85°C, IF=300mA
Tested with Nichia standard circuit board.ꢀ
60°C, RH=90%, IF=450mA
Tested with Nichia standard circuit board.ꢀ
Ta=-10°C, IF=500mA
Tested with Nichia standard circuit board.ꢀ
100 ~ 2000 ~ 100Hz Sweep 4min.
200m/s2
Steady State Operating Life
of High Temperature
Steady State Operating Life
of High Humidity Heat
Steady State Operating Life
of Low Temperature
Vibration
JEITA ED-4701
400 403
3directions, 4cycles
R=1.5kΩ, C=100pF
Electrostatic Discharge
JEITA ED-4701
300 304
3 times
0/10
Test Voltage=2kV
Negative/Positive
ꢀ Thermal resistance of LED with Nichia standard circuit board : Rja ≒ 35°C/W
(2) CRITERIA FOR JUDGING DAMAGE
Criteria for Judgement
Min.
Max.
Item
Symbol Test Conditions
Forward Voltage
Optical Power Output
VF
IF=500mA
IF=500mA
-
Initial Level ꢃ 1.1
Po
Initial Level ꢃ 0.7
-
ꢀ The test is done after the board is cooled down enough at the room temperature.
-3-
NICHIA [ NICHIA CORPORATION ]
