R Series Intelligent DAQ –
Data Acquisition and Control with Onboard Processing
Required Software for R Series Intelligent DAQ
• NI 781xR and 783xR devices require the LabVIEW FPGA Module 7.1
or later and NI-RIO 1.3 or later driver software.
Recommended Accessories
High Performance
SHC68-68-RMIO – High-performance shielded 68-conductor cable
terminated with a VHDCI 68-pin male connector at one end and a
68-pin female 0.050 D-type connector at the other end that has been
specifically designed for the multifunction I/O connector on R Series
• NI 784xR and 785xR devices require the LabVIEW FPGA Module 8.5.1
or later and NI-RIO 2.4 or later.
• NI 7853R and 7854R devices require the LabVIEW FPGA Module 8.6
or later and NI-RIO 3.0 or later.
intelligent DAQ devices.
1 m .....................................................................189588-01
2 m .....................................................................189588-02
Low-Cost Signal Conditioning and Channel Expansion
The NI cRIO-9151 R Series expansion chassis connects directly to any
digital connector on R Series devices and houses up to four C Series I/O
modules for industrial signal conditioning, I/O channel expansion, and
direct sensor connectivity.
SHC68-68-RDIO – High-performance shielded 68-conductor cable
terminated with a VHDCI 68-pin male connector at one end and a
68-pin female 0.050 D-type connector at the other end that has been
specifically designed for the digital I/O connector on R Series intelligent
DAQ devices.
1 m .....................................................................191667-01
SCB-68 – Shielded I/O connector block for rugged, very low-noise signal
termination for connecting to 68-pin devices. The SCB-68 also includes
two general-purpose breadboard areas.
Dimensions – 19.5 by 15.2 by 4.5 cm (7.7 by 6.0 by 1.8 in.)
SCB-68 .................................................................776844-01
Ordering Information
Low Cost
PCI
SH68-C68-S – General-purpose shielded cable that connects any type
NI PCI-7811R................................................................779363-01
NI PCI-7813R................................................................779370-01
NI PCI-7830R................................................................779361-01
NI PCI-7831R................................................................778797-01
NI PCI-7833R................................................................779359-01
of R Series connector to 68-pin connector blocks.
0.5 m...................................................................186381-0R5
1 m .....................................................................186381-01
2 m .....................................................................186381-02
PXI
Custom Cabling
NI PXI-7811R................................................................778800-01
NI PXI-7813R................................................................779362-01
NI PXI-7830R................................................................779364-01
NI PXI-7831R................................................................778668-01
NI PXI-7833R................................................................779360-01
NI PXI-7841R................................................................780337-01
NI PXI-7842R................................................................780338-01
NI PXI-7851R................................................................780339-01
NI PXI-7852R................................................................780340-01
NI PXI-7853R................................................................780341-01
NI PXI-7854R................................................................780342-01
Includes NI-RIO driver software.
SHC68-NT-S – Shielded 68-conductor cable terminated with a 68-pin
male VHDCI connector at one end and unterminated bare wires at the
other. Use this cable, ideal for OEM applications, to create custom
cabling solutions for R Series devices.
2 m .....................................................................189041-02
NSC68-262650 – Shielded cable terminated with a VHDCI 68-pin male
connector at one end and two 26-pin ribbon connectors and one 50-pin
ribbon connector on the other; designed to connect the R Series RMIO
connector to standard ribbon cable accessories.
1 m .....................................................................189151-01
NSC68-5050 – Shielded cable terminated with a VHDCI 68-pin male
connector at one end and two 50-pin ribbon connectors on the other;
designed to connect R Series RDIO connectors to standard ribbon
BUY NOW!
cable accessories.
1 m .....................................................................189152-01
For complete product specifications, pricing, and accessory
information, call 800 813 3693 (U.S.) or go to ni.com/rseries.
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
3