High-Speed Digitizers – Optimized for Automated Test
Input coupling
Specifications
NI 5154, NI 5153 ............................ AC, DC
NI 5152 ........................................... AC, DC, GND
AC coupling cutoff frequency (-3 dB)
NI 5154, NI 5153 ............................ 114 kHz, 50 Ω
NI 5152 ........................................... 106 kHz, 50 Ω; 12 Hz, 1 MΩ
These specifications are valid for 0 to 55 °C unless otherwise stated.
Acquisition System
Number of channels............................ 2 simultaneously sampled
Vertical resolution............................... 8 bits
Bandwidth (-3 dB)
NI 5154..................1 GHz minimum
NI 5153.............500 MHz minimum
NI 5152:
Accuracy
DC Accuracy
NI 5154
NI 5153
NI 5152
Typical
Typical
Typical
0.1 to 1 Vpp
2 to 5 Vpp
0.1 to 1 Vpp
2 to 5 Vpp
0.1 to 1 Vpp
2 to 5 Vpp
(1.0ꢀ of Input + 1.3ꢀ of FS)
(1.4ꢀ of Input + 1.3ꢀ of FS)
(1.0ꢀ of Input + 1.3ꢀ of FS)
Range (Vpp
)
50 Ω
1 MΩ
All except 0.1
340 MHz, typical
300 MHz, minimum
165 MHz, typical
135 MHz, minimum
300 MHz, typical
260 MHz, minimum
135 MHz, typical
110 MHz, minimum
(1.4ꢀ of Input + 1.3ꢀ of FS)
(1.26ꢀ of Input + 1.0ꢀ of FS + 500 µV)
(1.26ꢀ of Input + 1.0ꢀ of FS + 5 mV)
0.1
Channel-to-channel crosstalk ............. <-80 dB at 10 MHz,
<-60 dB at 100 MHz
Bandwidth limit filters
Spectral Characteristics
(software-selectable) .............................. 20 MHz noise filter
Maximum sampling rate..................... 1 GS/s (2 ch) or 2 GS/s (1 ch)
real-time sampling, 20 GS/s
Noise Filter Noise Filter
ON
OFF
equivalent-time/random-
interleaved sampling
Onboard sample memory.................... 8, 64, or 256 MB per channel
(8, 64, or 256 million samples)
ENOB
7.3
45 dB
7.3
45 dB
7.3
6.7
41 dB
6.7
41 dB
7.1
NI 5154
NI 5153
NI 5152
Signal-to-noise-and-distortion (SINAD) ratio, typical
ENOB
Signal-to-noise-and-distortion (SINAD) ratio, typical
ENOB
Multiple Record Acquisition
Signal-to-noise-and-distortion (SINAD) ratio, typical
45 dB
43 dB
Memory/Channel
Maximum Number of Records
8 MB
64 MB
256 MB
32,768
100,0001
100,0001
Timebase System
Timebase options................................ Internal, external (PFI 0)
1More than 1 million in streaming configuration
Internal
Internal sample clock frequency ........ 1 GS/s sampling rate with
Full-scale input ranges
NI 5154 and NI 5153:
decimation by n, 1 ≤ n ≤ 65,535
Timebase accuracy2 ............................ 25 ppm ( 0.0025ꢀ)
if phase-locked to 10 MHz
Full-Scale Input Range
0.5
Ranges (Vpp
)
backplane clock
0.1
0.2
1
2
5
2Accuracy will improve when phase-locking to a more accurate reference, such as an NI PXI-665x
timing and synchronization module, which can provide timebase accuracy down to 50 ppb.
NI 5152:
External
Full-Scale Input Range and Programmable Vertical Offset
50 Ω 1 MΩ
External clock sources ........................ PFI 0 (SMB connector)
External clock range............................ 350 MHz to 1 GHz, variable
with decimation by n where
Range
Vertical Offset
Range (V)
Range
Vertical Offset
Range (V)
(Vpp
0.1
0.2
0.4
1
)
(Vpp
0.1
0.2
0.4
1
)
1
1
1
1
6
5
2
1
1
1
1 ≤ n ≤ 65,535
External reference sources ................. PXI_CLK10 (backplane connector);
PFI 0 (front panel SMB connector)
External reference range ...................... 1 to 20 MHz in 1 MHz increments;
default to 10 MHz
External clock/reference amplitude ..... Sine wave: 0.65 to 2.8 Vpp
(0 to 13 dBm)
1
2
4
10
2
4
10
10
10
10
External clock/reference impedance.... 50 Ω, AC coupled
Input impedance
NI 5154, NI 5153 ............................ 50 Ω
NI 5152 ........................................... 50 Ω and 1 MΩ || 22 pF,
software-selectable
Maximum input overload.................... 50 Ω: 7 Vrms with |peaks|≤ 10 V
1 MΩ: |peaks| ≤ 42 V (NI 5152)
BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)
4
NI [ National Instruments ]
