Standard Parts List
Displacement［μm］
Resonance
frequency
［kHz］
Insulation
resistance
［MΩ］
Overall length Generated force
Stiffness
［N/um］
Capacitance
［μF］
Maximum
Model
［mm］
［N］
driving voltage
［150VDC］
AE0203D04F
4.6±1.5
5
200
200
43.5
22.0
11.5
4.8
261
138
69
0.09
0.18
0.35
0.82
0.75
1.4
100
100
50
20
50
10
5
AE0203D04DF
AE0203D08F
9.1±1.5
10
20
40
10
20
40
20
40
AE0203D08DF
AE0203D16F
17.4±2.0
200
AE0203D16DF
AE0203D44H40F
42.0±6.6
200
34
AE0203D44H40DF
AE0505D08F
9.1±1.5
850
93.4
48.9
20.2
190.2
83.3
138
69
AE0505D08DF
AE0505D16F
17.4±2.0
850
AE0505D16DF
AE0505D44H40F
42.0±6.6
850
34
3.4
AE0505D44H40DF
AE1010D16F
18.4±3.5
3,500
3,500
69
5.4
5
AE1010D16DF
AE1010D44H40F
42.0±6.6
34
13.6
2
AE1010D44H40DF
AE1414D16F
AE2525D15F
18.4±3.5
15.6±2.0
20
20
7,000
380.4
69
69
10.8
30.5
2
20,000
1,282.0
0.4
*Tow coating types are available. AE＊＊＊＊D＊＊DF has thinner coating thickness.
*For detail information of measurement conditions and outer dimension, please refer to “Performance” and “Outer Dimension” sections.
Performance
Item
Standard
Conditions
When applied with a DC voltage: Ambient temperature
Operating temperature range
ー25 to ＋85℃
When driven by an AC voltage: Ambient temperature + Temperature
rise due to generated heat
Recommend storage at room temperature.
No condensation.
Recommended Storage
condition
ー5 to ＋40℃ / less than 40%R.H
Maximum driving voltage
Displacement
150VDC
See the standard parts list
At 150VDC
The force required for restricting the displacement to 0 when the
maximum driving voltage is applied.
Generated force
（compression resistance）
See the standard parts list
Capacitance
See the standard parts list
＋/ー20 %
Capacitance allowance
Dissipation factor
Insulation resistance
f＝1kHz, V＝1Vrms
5% or less
See the standard parts list
Value obtained in 1 minute at 150 VDC
With both ends of element in free state
Resonance frequency
See the standard parts list
Typical value of the element under our test conditions
Tensile strength
Young's modulus
1/10 of generated force
Typical value of the element under our test conditions
Typical value of the element under our test conditions
4.4×1010N/m2
Displacement: Initial value ±20%
Capacitance: Initial value ±30%
tanδ: Less than initial rated value
Insulation resistance: 1MΩ or more
Appearance: No noticeable defect
Room temperature（3 min）
–25℃（30 min.）
Room temperature（3 min）
+85℃（30 min）
Temperature cycle test
Repetition of 10 cycles of the above
6
Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
NEC [ NEC ]
