APPLICATION SPECIFIC CAPACITORS
HIGH FREQUENCY CERAMIC CAPACITORS
MA/MB Series
SPECIFICATIONS
MA/MB 18/28; 0.05% maximum
MA 58/68; 0.15% maximum @ 1.0VRMS (f = 1 MHz)
Dissipation Factor
MA 78/88; 2.5% maximum @ 1.0VRMS maximum (f = 1kHz)
MB28 Series P90 30ppm/°C, (–55°C to +175°C)
MA 18/28 Series P90 20ppm/°C, (–55°C to +125°C)
MA 58/68 Series; COG (0 30ppm/°C, –55°C to +125°C)
MA 78/88 Series; 15% maximum (–55°C to +125°C)
Temperature Coefficient
Insulation Resistance
MA/MB 18/28 1000K M Ohms at +25°C, 100K M Ohms at +125°C
MA 58/68 1000K M Ohms at +25°C, 100K M Ohms at +125°C
MA 78/88 100K M Ohms or 1000 M Ohm ꢀF min., whichever is less (@ 25°C)
10K M Ohms or 100 M Ohms ꢀF min., whichever is less (@ 125°C)
Dielectric Test Voltage
Capacitance Drift
Aging
MA/MB 18/28/58/68/78/88, 250% of WVDC for 5 seconds
Meets or Exceeds MIL-PRF-55681 (Does not apply for MA 78/88)
Negligible for MA/MB 18/28/58/68, MA 78/88; 2.5% per decade maximum
MIL-STD-202
Environmental Tests
Shock
Method 213, Condition J
Vibration
Method 204, Condition B
Moisture Resistance
Solderability
Method 106
Method 208
Immersion
Method 104, Condition B
Barometric Pressure
Resistance to Soldering Heat
Thermal Shock
Life
Method 105, Condition B
Method 210, Condition B
Method 107, Condition A
Method 108, Condition F
Marking
Standard MA/MB product is unmarked
DIMENSIONS: mm
PACKAGING:
TAPE AND REEL PACKAGING
+0.1
1.5
–0
Case 1 – 3,000 pcs.
1.75 0.1
3.5 0.05
Case 2 – 1,000 pcs.
8.0 0.3
B0
2.75
A0
Unit: mm
4.0 0.1 4.0 0.1
2.0 0.1
Cover tape
Direction of feed
NOTE: 1 Ao & Bo are determined by maximum specified length
and width of components plus 0.016 0.008, plus the additional
requirement that components not be allowed to rotate more than
20° within the cavity clearance or whichever condition occurs first.
Embossed
carrier
Embossment
CONDUCTIVE TAPE
ELECTRICAL PROPERTIES
Advantages
Benefits
Property
Value
Test Method
Conductive
Prevents static charge build-up
Resistivity
5 x 105 ohm/square
ASTM D-257
Insures against crazing, cracking
and brittleness
Electrostatic
Decay Time
Flexibility
0.01 Sec.
ASTM D-257
At 50% RH@21°C
Drive loading will not elongate
sprocket holes
Dimensional strength
Dimensional stability
Typical Values
Smooth, reliable running on
pick and place machines
Other packaging options available — Consult Factory
CG01-J
123
MURATA [ muRata ]
