Package
(c) Type C (Dimensions of chip : Apply to 4.5x3.2 to 5.7x5.0)
2.0±0.05
0.3±0.1
f1.5+0.1/-0
4.0±0.1
8.0±0.1
3.7max.
A
(Unit : mm)
Dimensions of chip
[L×W]
A*
B*
4.5×3.2
3.6
3.2
5.4
4.9
6.1
6.1
Dimensions of A,B : Nominal value
5.7×2.8
5.7×5.0
(4) Dimensions of Reel
13.0±1.0 : Tape width 8mm
17.0±1.0 : Tape width 12mm
2.0±0.5
f21±0.8
f13±0.2
(Unit : mm)
9.0+1.0/-0 : Tape width 8mm
13.0+1.0/-0 : Tape width 12mm
(5) Part of the leader and part of the empty tape shall be attached to the end of the tape as follows.
Vacant section : 160 min. Chip-mounting unit Vacant section : 190 min.
210 min.
(Unit : mm)
Direction of feed
(6) The top tape or cover tape and base tape are not attached at the end of the tape for a minimum of 5 pitches.
(7) Missing capacitors number within 0.1% of the number per reel or 1pc, whichever is greater, and not continuous.
(8) The top tape or cover tape and bottom tape shall not protrude beyond the edges of the tape and shall not
cover sprocket holes.
(9) Cumulative tolerance of sprocket holes, 10 pitches : ±0.3mm.
(10) Peeling off force : 0.1 to 0.6N in the direction shown on the follows.
165 to 180°
Top Tape or Cover Tape
Base Tape
JEMCGP-03074B
6
MURATA [ muRata ]
