■ Specifications and Test Methods
No Item
6 Biased Humidity
Specification
Test Method（Ref. Standard:AEC-Q200）
Solder the capacitor on the test substrate
85+/-3℃
80%RH to 85%RH
Appearance
No defects or abnormalities.
Within +/-0.3pF
Q≧100+10C/3 C:Nominal Capacitance(pF)
More than 500MΩ
Mounting method
Test Temperature
Test Humidity
Test Time
Capacitance Change
Q or D.F.
I.R.(Room Temp.)
1000+/-12h
Test Voltage
The rated voltage and 1.3+0.2/-0Vdc (add 6.8kΩ resister)
Charge/discharge current 50mA max.
Post-treatment
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
Appearance
Capacitance Change
Q or D.F.
No defects or abnormalities.
Within +/-0.3pF
Q≧200+10C C:Nominal Capacitance(pF)
More than 1000MΩ
Mounting method
Test Temperature
Test Time
Solder the capacitor on the test substrate
Maximum Operating Temperature +/-3℃
1000+/-12h
7 Operational Life
I.R.(Room Temp.)
Test Voltage
200% of the rated voltage
Charge/discharge current 50mA max.
Post-treatment
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
No defects or abnormalities.
Shown in Dimension.
Visual inspection
8 Appearance
Using Measuring instrument of dimension.
Per MIL-STD-202 Method 215
9 Dimension
Appearance
Capacitance
Q or D.F.
No defects or abnormalities.
10 Resistance to Solvents
Within the specified initial value.
Within the specified initial value.
Within the specified initial value.
I.R.(Room Temp.)
Appearance
Capacitance
Q or D.F.
No defects or abnormalities.
Mounting method
Waveform
Peak value
Solder the capacitor on the test substrate
Half-sine
1500g
0.5ms
11 Mechanical Shock
Within the specified initial value.
Within the specified initial value.
Within the specified initial value.
I.R.(Room Temp.)
Holding Time
Velocity change
Shocks directions and times
4.7m/s
Three shocks in each direction should be applied along 3
mutually perpendicular axes of the test specimen (18 shocks).
Appearance
Capacitance
Q or D.F.
No defects or abnormalities.
Mounting method
Kind of Vibration
Vibration Time
Solder the capacitor on the test substrate
A 10Hz to 2000Hz to 10Hz
20min
1.5mm
12 Vibration
Within the specified initial value.
Within the specified initial value.
Within the specified initial value.
I.R.(Room Temp.)
Total amplitude
Vibration directions and time
This motion should be applied for 12 items in each 3 mutually perpendicular directions
(total of 36 times).
Appearance
Capacitance or Capacitance Change
No defects or abnormalities.
Test Method
Solder bath method
Sn-3.0Ag-0.5Cu(Lead Free Solder)
260+/-5℃
10+/-1s
13 Resistance to Soldering
Heat
Capacitance:Within the specified initial value.
Within the specified initial value.
Within the specified initial value.
Kind of Solder
Test Temperature
Test Time
Q or D.F.
I.R.(Room Temp.)
Post-treatment
Non treatment:Let sit for 24+/-2hours at room temperature, then measure.
Appearance
Capacitance
Q or D.F.
No defects or abnormalities.
Per AEC-Q200-002
14 ESD
Within the specified initial value.
Within the specified initial value.
Within the specified initial value.
I.R.(Room Temp.)
GCQ1555C1H6R6WB01-01A
3
MURATA [ muRata ]
