Spec No. J(E)TE243A-0004
Reference Only
規 格
Specification
条 件
Condition
温度-40±3℃中に 500±12時間放�½�後常温常湿中に
1時間放�½�し、1時間以内に測定。
The specimen shall be stored at a temperature of -40±3℃
for 500±12 h. Then it shall be stabilized under standard
atmospheric conditions for 1 h before measurement.
Measurement shall be made within 1 h.
温度+85±2℃中に 500±12時間放�½�後常温常湿中に
1時間放�½�し、1時間以内に測定。
The specimen shall be stored at a temperature of 85±2℃
for 500±12 h. Then it shall be stabilized under standard
atmospheric conditions for 1 h before measurement.
Measurement shall be made within 1 h.
温度60±2℃、湿度90�½�95%中に 500±12時間放�½�後
常温常湿中に1時間放�½�し、1時間以内に測定。
The specimen shall be stored at a temperature of 60±2℃
with relative humidity of 90�½�95% for 500±12 h. Then it shall be
stabilized under standard atmospheric conditions for 1 h
before measurement. Measurement shall be made within 1 h.
-40℃(30分)→常温(2分以内)→85℃(30分)→常温
(2分以内)を1�½��½��½�ルとし、これを 500�½��½��½�ル行い、
常温常湿中に1時間放�½�し、1時間以内に測定。
The specimen shall be subjected to 500 continuous cycles
of temperature change of -40℃ for 30 min and 85℃ for
30 min with the transit period of 2min or less. Then it shall be
stabilized under standard atmospheric conditions for 1 h
before measurement. Measurement shall be made within 1 h.
温度-40�½�+85℃の間で測定。
To be measured in the range of -40℃ to 85℃.
自己温度上昇を含む。(⊿T=40℃ Max.)
Including self temperature rise.(⊿T=40℃ Max.)
4/9
DFE252010C Type
一般仕様
General Specifications ( 2/3 )
項 目
Item
8 耐寒性
Low temperature
初期値に対する
Lの変化率 ± 10%以内
Change from an initial value
L
:
within ± 10%
9 耐熱性
Dry heat
初期値に対する
Lの変化率 ± 10%以内
Change from an initial value
L
:
within ± 10%
10 耐湿性
Damp heat
初期値に対する
Lの変化率 ± 10%以内
Change from an initial value
L
:
within ± 10%
11 温度�½��½��½�ル
Temperature cycle
初期値に対する
Lの変化率 ± 10%以内
Change from an initial value
L : within ±10%
12 温度特性
Temperature drift
�½�ンダ�½�タン�½½温度係数
1000 ppm/℃ 以下
Inductance temperature coefficient
1000 ppm/℃ or less
13 �½�用温度範囲
Operating temperature
range
14 保存温度範囲
Storage temperature
range
-40 �½� +85℃
-40 �½� +85℃