Freescale Semiconductor, Inc.
Analog-to-Digital Converter
VRHx
VRLx
RC DAC ARRAY
AND COMPARATOR
REFERENCE
SUPPLY
VDDA
VSSA
SAR
ANx7/PADx7
ANx6/PADx6
ANx5/PADx5
ANx4/PADx4
ANx3/PADx3
ANx2/PADx2
ANx1/PADx1
ANx0/PADx0
ATD 0
ATD 1
ATD 2
ATD 3
ATD 4
ATD 5
ATD 6
ATD 7
ANALOG MUX
AND
SAMPLE BUFFER AMP
PORT AD
DATA INPUT REGISTER
CLOCK
SELECT/PRESCALE
INTERNAL BUS
Figure 18-1. Analog-to-Digital Converter Block Diagram
18.3 Functional Description
A single conversion sequence consists of four or eight conversions,
depending on the state of the select 8 channel mode (S8CM) bit when
ATDxCTL5 is written. There are eight basic conversion modes. In the
non-scan modes, the SCF bit is set after the sequence of four or eight
conversions has been performed and the ATD module halts. In the scan
modes, the SCF bit is set after the first sequence of four or eight
conversions has been performed, and the ATD module continues to
restart the sequence. In both modes, the CCF bit associated with each
register is set when that register is loaded with the appropriate
conversion result. That flag is cleared automatically when that result
register is read. The conversions are started by writing to the control
registers.
Advance Information
324
68HC(9)12D60 — Rev 4.0
Analog-to-Digital Converter
MOTOROLA
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA [ MOTOROLA ]
