V436616Y24V
10.
11.
CILETIV LESOM
.
tCH
2.4V
CLOCK
0.4V
+ 1.4 V
50 Ohm
Z=50 Ohm
I/O
50 pF
tCL
tSETUP
tHOLD
t
T
INPUT
1.4V
tAC
tLZ
tOH
tAC
I/O
50 pF
1.4V
OUTPUT
Measurement conditions for
tac and toh
tHZ
5. If clock rising time is longer than 1 ns, a time (t
T
/2 -0.5) ns has to be added to this parameter.
6. Rated at 1.5V
7. If t
T
is longer than 1 ns, a time (t
T
-1) ns has to be added to this parameter.
8. Any time that the refresh Period has been exceeded, a minimum of two Auto (CBR) Refresh commands must be
given to “wake-up” the device.
9. Self Refresh Exit is a synchronous operation and begins on the 2nd positive clock edge after CKE returns high.
Self Refresh Exit is not complete until a time period equal to t
RC
is satisfied once the Self Refresh Exit command
is registered.
Referenced to the time which the output achieves the open circuit condition, not to output voltage levels.
t
DAL
is equivalent to t
DPL
+ t
RP
.
V436616Y24V Rev. 1.0 January 2002
9