PUMA2/67/77S4000/A-020/025/35
Issue4.3:December1999
DC OPERATING CONDITIONS
Absolute Maximum Ratings (1)
Voltage on any pin relative to GND(2)
Power Dissipation
Storage Temperature
VT
PT
-0.5V to +7.0
4
V
W
°C
TSTG -65 to +150
Notes (1) Stresses above those listed may cause permanent damage. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
(2) Pulse width: -3.0V for less than 10ns.
Recommended Operating Conditions
min
typ
max
Supply Voltage
VCC
VIH
VIL
4.5
2.2
-0.5
0
5.0
5.5
6.0
0.8
70
V
V
Input High Voltage
Input Low Voltage
Operating Temperature
-
-
-
-
-
V
°
TA
C
°
TAI
TAM
-40
-55
85
C (Suffix I)
125
°C (Suffix M, MB)
DC Electrical Characteristics (VCC=5V±10%,TA=-55°C to +125°C)
Parameter
Symbol Test Condition
min
-8
typ
max Unit
Input Leakage Current
ILI1
ILO
VIN=0V to VCC
CS(1)=VIH or OE=VIH, VI/O=0V to VCC
-
-
8
8
µA
µA
Output Leakage Current
-8
WE=VIL
Operating Supply Current 32 bit ICC32 Mincycle,duty=100%,II/O=0mA,CS=VIL
16 bit ICC16 As above
-
-
-
-
-
-
-
-
680 mA
420 mA
290 mA
160 mA
40 mA
-
8 bit ICC8
(TTL) ISB1
-L Version ISB2
VOL
Mincycle,duty=100%,II/O=0mA,CS=VIL
CS(1)≥VIH VCC = 5.5V
CS(1) ≥ VIH, VIL≤ VIN≥ VIH, f = 0 Hz
-
-
Standby Supply Current
-
Output Voltage Low
Output Voltage High
IOL = 8.0mA
-
0.4
-
V
V
VOH
IOH = -4.0mA
2.4
Notes: (1) CS and WE above are accessed through CS1~4 and WE1~4 respectively. These inputs must be
operated simultaneously for 32 bit mode, in pairs for 16 bit mode and singly for 8 bit mode.
Capacitance (VCC=5V±10%,TA=25°C) Note: (1) On the standard module, WE = 30 pF max.
Parameter
Symbol
Test Condition
typ max Unit
Input Capacitance Address, OE
WE1~4(1), CS1~4
CIN1
CIN2
CI/O
VIN =0V
VIN =0V
VI/O=0V
-
-
-
30 pF
16 pF
I/O Capacitance
D0~D31
30 pF (8 bit mode)
These parameters are calculated, not measured.
2