18.0-30.0 GHz GaAs Receiver
QFN, 7x7 mm
November 2006 - Rev 03-Nov-06
R1002-QB
Typical Application
XR1002-QB
BPF
IF Out
4 GHz
LNA
IR Mixer
Coupler
RF IN
27.5-29.5 GHz
AGC Control
Atten=0-12dB
LO(+15dBm)
23.5-25.5 GHz (USB Operation)
31.5-33.5 GHz (LSB Operation)
Mimix Broadband MMIC-based 18.0-30.0 GHz Receiver Block Diagram
(Changing LO and IF frequencies as required allows design to operate as high as 30 GHz)
Also See: Multiplier selection guide at www.mimixbroadband.com for multipliers that can be used to drive the XR1002.
Factory Automation and Identification
Mimix
Designator
Package
Type
Number of
leads offered
W Tape
Width
P1 Component P0 Hole
Reel
Diameter
Units
per Reel
Pitch
Pitch
-QB
QFN (7x7mm)
16mm
28
12mm
4mm
329mm (13in)
1000
Tape and Reel Packaging per the following conditions:
Tape Width:
16 mm
Tape Pitch (part to part):
Component Orientation:
Reel Diameter:
12 mm
Parts are to be oriented with the PIN 1 closest to the tape's round sprocket holes on the tape’s trailing edge.
329 mm (13 inch)
Note:Tape and Reel packaging is ordered with a -000T suffix. Package is available in 500 unit reels through designated sales channels.
Minimum order quantities should be discussed with your local sales representative.
Page 8 of 10
Mimix Broadband, Inc., 10795 Rockley Rd., Houston,Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
MIMIX [ MIMIX BROADBAND ]
