2N6796, 2N6798, 2N6800, 2N6802
Notes:
1. Derate linearly 0.2 W/°C for T
C
> +25 °C.
2. The following formula derives the maximum theoretical I
D
limit. I
D
is also limited by package and internal wires and may be limited due to
pin diameter.
3. I
DM
= 4 x I
D1
as calculated in note 2.
MECHANICAL and PACKAGING
•
•
•
•
•
CASE: Hermetically sealed, kovar base, nickel cap.
TERMINALS: Tin/lead solder dip nickel plate or RoHS compliant pure tin plate (commercial grade only).
MARKING: Part number, date code, manufacturer’s ID.
WEIGHT: Approximately 1.064 grams.
See
on last page.
PART NOMENCLATURE
JAN
Reliability Level
JAN = JAN Level
JANTX = JANTX Level
JANTXV = JANTXV Level
JANS = JANS level (2N6798)
Blank = Commercial
JEDEC type number
(see
table)
2N6796
(e3)
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
Symbol
di/dt
I
F
R
G
V
DD
V
DS
V
GS
SYMBOLS & DEFINITIONS
Definition
Rate of change of diode current while in reverse-recovery mode, recorded as maximum value.
Forward current
Gate drive impedance
Drain supply voltage
Drain source voltage, dc
Gate source voltage, dc
T4-LDS-0047, Rev. 3 (121483)
©2012 Microsemi Corporation
Page 2 of 9