DATA SHEET
VSP 94x2A
2
Table 3–8: I C bus command description, continued
Bit
Name
Description
Subaddress 5Ch
D7-D5
D4-D3
CON
[CP-CD]
Color Switched On (PAL/NTSC)
at level=CKILL+CON
‘000’: min value
‘010’: default
‘111’: max value
UVCOR
[CP-CD]
Chrominance coring
‘00’: off
‘01’: ±1LSB
‘10’: ± 2LSB
‘11’: ± 3LSB
D2
NOTCHOFF
[CP-CD]
Luminance notch-filter
‘0’: notch-filter enabled
‘1’: notch-filter bypassed
D1-D0
SECNTCH
[CP-CD]
Selection of Notch filter behavior in SECAM mode
‘00’: 4.406 MHz
‘01’: 4.250 MHz
‘10’: 4.33 MHz
‘11’: 4.406 / 4.25 dependent on transmitted color
Subaddress 5Dh
D7-D6
D5-D4
D3-D2
PWTHD
[CP-CD]
Selection Of ‘Peak-White’ Threshold
‘00’: 448
‘01’: 470
‘10’: 500
‘11’: 511
CLRANGE
[CP-CD]
Chroma lock-range
‘00’: ± 425 Hz
‘01’: ± 463 Hz
‘10’: ± 505 Hz
‘11’: ± 550 Hz
LMOFST
[CP-CD]
Luminance Offset in color decoder during visible picture
‘00’: no offset
‘01’: −32 LSB ( −7.5 IRE)
‘10’:+32 LSB (+7.5 IRE)
‘11’: −16 LSB (−3.75 IRE)
Note: A 7.5 IRE offset is added during blanking in display processing. When
choosing ‘10’, the luminance offset is equal to the offset of the CVBS input as
in both picture and blanking the same 7.5 IRE offset is used.
D1
VDETIFS
[CP-CD]
Vertical Sync-Detection Slope
‘0’: normal
‘1’: slow
Micronas
Aug. 16, 2004; 6251-552-1DS
75