欢迎访问ic37.com |
会员登录 免费注册
发布采购

SDA9410-B13 参数 Datasheet PDF下载

SDA9410-B13图片预览
型号: SDA9410-B13
PDF下载: 下载PDF文件 查看货源
内容描述: 显示处理器,并采用扫描率转换器的嵌入式DRAM技术单位 [Display Processor and Scan Rate Converter using Embedded DRAM Technology Units]
分类和应用: 转换器动态存储器
文件页数/大小: 179 页 / 3137 K
品牌: MICRONAS [ MICRONAS ]
 浏览型号SDA9410-B13的Datasheet PDF文件第93页浏览型号SDA9410-B13的Datasheet PDF文件第94页浏览型号SDA9410-B13的Datasheet PDF文件第95页浏览型号SDA9410-B13的Datasheet PDF文件第96页浏览型号SDA9410-B13的Datasheet PDF文件第98页浏览型号SDA9410-B13的Datasheet PDF文件第99页浏览型号SDA9410-B13的Datasheet PDF文件第100页浏览型号SDA9410-B13的Datasheet PDF文件第101页  
SDA9410  
Preliminary Data Sheet  
Motion estimation  
The Figure 42 shows the block diagram of the motion estimation and motion  
compensation block. The field information is read line-wise from the internal field store  
and written to a line-to-block converter. The motion estimation and the motion  
compensation block read the field information in parallel block wise from the line-to-block  
converter. The cache in front of the blocks enables a random access of the field  
information.  
The result of the motion estimation is stored in the vector memory, which is also used as  
a vector field memory for the 3-D recursive block matching algorithm. At that time only  
vector information of block resolution is available. The post processing block computes  
a vector information of pixel resolution basis, which can be used from the motion  
compensation block for the up conversion process. Finally the results of the motion  
compensation block are written to the block-to-line converter block.  
Vector  
BVMRES  
memory  
BVMCON  
Vector  
Post  
Motion  
Cache  
Cache  
Estimation  
Processing  
MESMOOTHON  
Line  
to  
Field  
Store  
Block  
Converter  
eDRAM  
Block  
to  
Motion  
Compensation  
Line  
Converter  
ME-I²C bus parameter  
FILSEL  
VECDISON  
Figure 42  
Block diagram of motion estimation and compensation  
The Figure 43 illustrates a more detailed block diagram of the motion estimation block.  
The motion estimation block is separated in two branches. The left one is only  
responsible for still area detection and the right one for all kind of areas. The additional  
left branch can be switched off or on by the I²C Bus parameter MENULLFUNON (I²C Bus  
parameter 4Bh). Different preprocessing blocks are located in both branches due to the  
different tasks of the branches. After preprocessing of the input data the main  
computation, the block matching, is executed.  
For the right branch, the motion estimator applies two concurrent recursive block  
matchers, that individually check three candidate vectors with different convergence  
directions. Among the three candidates there is one spatial prediction vector taken from  
a previously processed block and a temporal prediction vector. The temporal prediction  
has the characteristic feature that its position is shifted with respect to the block currently  
processed in the opposite direction compared to the spatial prediction. The Figure 44  
97  
Micronas  
 复制成功!