SDA9410
Preliminary Data Sheet
Global motion, film mode and phase detection
Furthermore a global motion flag GMOTION is derived and the value MEMSTAT, which
is proportional to the amount of blocks, which fulfill the condition mentioned above.
I²C Bus
Sub address
Description
parameter
MOVPHIN
1: enabled
0: disabled
4Bh
Inversion of the Film phase signal
MEMMINMOT
4Bh
Minimum vector threshold for film mode and global motion
detection
MEMINTH
MEMAXTH
MEMOHIST
SFMINTH
SFMAXTH
4Dh
4Eh
4Fh
4Dh
4Dh
59h
Threshold for detection of motion in camera mode
Threshold for detection of motion in film mode
History length of Film mode and global motion detection
Scale factor for MEMINTH
Scale factor for MEMAXTH
Threshold for switching between the vector activity or the field
difference as input for the film mode detection
Use field difference as film mode detection input
1111: insensible to motion
MEMMNDTH
:
0001: sensible to motion
0000: use vector activity as film mode detection input
Table 83
Output write I²C Bus parameter
106
Micronas