HAL810
DATA SHEET
3.4. Absolute Maximum Ratings
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolute
maximum rating conditions for extended periods will affect device reliability.
This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric
fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than abso-
lute maximum-rated voltages to this high-impedance circuit.
All voltages listed are referenced to ground (GND).
Symbol
VDD
Parameter
Pin No.
Min.
−8.5
Max.
8.5
Unit
V
Supply Voltage
Supply Voltage
Reverse Supply Current
Output Voltage
1
1
1
3
VDD
−14.41) 2)
−
14.41) 2)
501)
V
−IDD
mA
V
VOUT
−55)
−55)
8.53)
14.43) 2)
VOUT − VDD
Excess of Output Voltage
over Supply Voltage
3,1
−
2
V
IOUT
tSh
Continuous Output Current
Output Short Circuit Duration
Junction Temperature Range
3
3
−10
10
10
mA
min
−
TJ
−40
−40
1704)
150
°C
°C
NPROG
Number of Programming Cycles
−
100
1) as long as TJmax is not exceeded
2) t < 10 min (VDDmin = −15 V for t < 1 min, VDDmax = 16 V for t < 1 min)
3) as long as TJmax is not exceeded, output is not protected to external 14 V-line (or to −14 V)
4) t < 1000 h
5) internal protection resistor = 100 Ω
3.5. Recommended Operating Conditions
Functional operation of the device beyond those indicated in the “Recommended Operating Conditions/Characteris-
tics” is not implied and may result in unpredictable behavior, reduce reliability and lifetime of the device.
All voltages listed are referenced to ground (GND).
Symbol
VDD
IOUT
RL
Parameter
Pin No.
Min.
4.5
−1
Typ.
5
Max.
5.5
1
Unit
V
Supply Voltage
1
3
3
3
Continuous Output Current
Load Resistor
−
mA
kΩ
nF
10
−
−
CL
Load Capacitance
0.33
10
100
18
Feb. 6, 2009; DSH000034_003EN
Micronas
MICRONAS [ MICRONAS ]
