1.3. Marking Code
The HAL 815 has a marking on the package surface
(branded side). This marking includes the name of the
sensor and the temperature range.
Type
A
HAL 815
815A
Temperature Range
K
815K
E
815E
1.6. Solderability
ADVANCE INFORMATION
Package TO-92UT: according to IEC68-2-58
During soldering reflow processing and manual
reworking, a component body temperature of 260 °C
should not be exceeded.
Components stored in the original packaging should
provide a shelf life of at least 12 months, starting from
the date code printed on the package labels, even in
environments as extreme as 40 °C and 90% relative
humidity.
1.4. Operating Junction Temperature Range (T
J
)
The Hall sensors from Micronas are specified to the
chip temperature (junction temperature T
J
).
A:
TJ =
−40
°C to +170 °C
K:
TJ =
−40
°C to +140 °C
E:
TJ =
−40
°C to +100 °C
The relationship between ambient temperature (T
A
)
and junction temperature is explained in Section 4.5.
1.7. Pin Connections and Short Descriptions
Pin
No.
1
2
3
Pin Name
V
DD
GND
OUT
OUT
Type
IN
Short Description
Supply Voltage and
Programming Pin
Ground
Push Pull Output
and Selection Pin
1.5. Hall Sensor Package Codes
1
HALXXXPA-T
Temperature Range: A, K, or E
Package: UT for TO-92UT
Type: 815
Example:
HAL815UT-K
→
Type:
815
→
Package:
TO-92UT
→
Temperature Range: T
J
=
−40°C
to +140°C
Hall sensors are available in a wide variety of packag-
ing versions and quantities. For more detailed informa-
tion, please refer to the brochure: “Ordering Codes for
Hall Sensors”.
V
DD
OUT
3
2
GND
Fig. 1–1:
Pin configuration
4
Micronas
MICRONAS [ MICRONAS ]
