HAL805
PRELIMINARY DATA SHEET
3.4. Absolute Maximum Ratings
Symbol
VDD
Parameter
Pin No.
Min.
Max.
8.5
Unit
V
Supply Voltage
1
−8.5
VDD
Supply Voltage
1
−14.41) 2)
−
14.41) 2)
501)
V
−IDD
IZ
Reverse Supply Current
Current through Protection Device
Output Voltage
1
mA
mA
V
1 or 3
3
−3004)
3004)
VOUT
−56)
−56)
8.53)
14.43) 2)
VOUT − VDD
Excess of Output Voltage
over Supply Voltage
3,1
2
V
IOUT
tSh
TS
Continuous Output Current
Output Short Circuit Duration
Storage Temperature Range
Junction Temperature Range
3
3
−10
−
10
mA
min
°C
10
−65
150
TJ
−40
−40
1705)
150
°C
°C
1) as long as TJmax is not exceeded
2) t < 10 min (VDDmin = −15 V for t < 1 min, VDDmax = 16 V for t < 1 min)
3) as long as TJmax is not exceeded, output is not protected to external 14 V-line (or to −14 V)
4) t < 2 ms
5) t < 1000h
6) internal protection resistor = 100 Ω
Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This
is a stress rating only. Functional operation of the device at these or any other conditions beyond those indicated in
the “Recommended Operating Conditions/Characteristics” of this specification is not implied. Exposure to absolute
maximum ratings conditions for extended periods may affect device reliability.
3.5. Recommended Operating Conditions
Symbol
VDD
IOUT
RL
Parameter
Pin No.
Min.
4.5
Typ.
5
Max.
5.5
1
Unit
V
Supply Voltage
1
3
3
3
Continuous Output Current
Load Resistor
−1
−
mA
kΩ
nF
4.5
−
−
CL
Load Capacitance
0.33
10
1000
12
Micronas